Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Junior Member
 
Posts: 1
Default Totaline Wireless Thermostat

Hi,
I've just installed a totaline wireless thermostat P474-1100RF and receiver P474-1100REC in my home.
My old lux 1500 thermostat had the following terminals: G, Y, W, RH, B, O, RC. The wires from the furnace were connected Green to G, White to W and Red to RH and there was a thick black jumper wire from the RH to RC terminals.

The totaline has the following terminals: C, G, Y1, W1/O/B (all one terminal), R, Y2, W2.

Common logic would assume that the Green wire goes to G, White to W1/O/B and Red to R.

The problem is that now when I try to get the heat to come on, the fan comes on for a minute and no heat comes out no matter how high I set the temp.

Any ideas about what I need to do, or should I call an HVAC technician?

All ideas appreciated.

Thank you in advance.

Susan
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
British Gas Wireless Thermostat g00ner UK diy 21 July 11th 20 07:14 PM
Wireless Thermostat Installation Issues Mark Rullo Home Repair 20 October 17th 06 03:58 PM
Wireless thermostat [email protected] Home Repair 3 October 13th 06 09:05 PM
Totaline thermostat problem Priz Home Repair 2 November 16th 05 08:23 PM
To anyone sick of alt.hvac Matt Morgan Home Repair 87 April 8th 05 05:17 PM


All times are GMT +1. The time now is 09:11 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"