| Home |
| Search |
| Today's Posts |
 |
|
Menu
| Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
| Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to alt.home.repair
|
|||
|
|||
Gas hot water tank vs. Electric hot water tank
I posted earlier regarding smell in the water. Is it true that you can
take the rod out of the gas hot water tank and the tank will not break down, but that you can't take the rod out of an electric hot water tank, because it will break the lining down ? |
|
#2
Posted to alt.home.repair
|
|||
|
|||
|
Gas hot water tank vs. Electric hot water tank
no in either case removing the anode will cause failure in a metal tank
some electric tanks are plastic thse probably dont need a anode rod at all |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| can you weld a pinhole in a water tank? | Metalworking | |||
| Detergents and cleaners FAQ | UK diy | |||
| cheap water tank needed ! | Home Repair | |||
| Water heater in series to use as storage tank ... good or bad? | Home Repair | |||
| GE HTS22GBMARWW Digital Controls refrig 22 cu ft.....main bord failure number #3! | Home Repair | |||
Linear Mode
