I have a Sears Craftsman opener that was working fine this morning, but
opened this afternoon and would not close. I checked the alignment of
the sensors and both were fine. When I press the wired or remote
opener, all I hear is a clicking noise with no movement of the chain. I
disengaged the door and still have the same problem. Any ideas?
Thanks

Schief wrote:
I have a Sears Craftsman opener that was working fine this morning,
but opened this afternoon and would not close. I checked the
alignment of the sensors and both were fine. When I press the wired
or remote opener, all I hear is a clicking noise with no movement of
the chain. I disengaged the door and still have the same problem. Any
ideas?
Thanks

Try moving the door manually (open the release) and then reset the
release. See if that helps.

--
Joseph Meehan

Dia duit

Schief wrote:
I have a Sears Craftsman opener that was working fine this morning,
but opened this afternoon and would not close. I checked the
alignment of the sensors and both were fine. When I press the wired
or remote opener, all I hear is a clicking noise with no movement of
the chain. I disengaged the door and still have the same problem. Any
ideas?
Thanks

Make sure a spider or other critter hasn't taken up residence in the "eye"
that receives the beam from the other side of the door frame...if the eye is
obstructed the door won't come down because it thinks it will hit something.
Shouldn't matter trying to close it manually though...

--

dadiOH
____________________________

dadiOH's dandies v3.06...
....a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico