Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
fuel pickup on 2 hp Briggs
My neighbor has an old tiller with a Briggs 60102 motor. The fuel
tank is screwed to the carburetor as a sort of float bowl. A plastic tube with a screen on the end extends down into the fuel. It seems to be clogged, probably with off-season deposits. How can I remove the tube? A 9/16" wrench fits the screened end, but it won't turn and so far has not slid out. If it won't come out, is there a solvent that could clean it in place? |
#2
Posted to alt.home.repair
|
|||
|
|||
fuel pickup on 2 hp Briggs
Sawney,
Gumout Carb Cleaner should work. Dave M. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Sealing Plastic Fuel Tank | Home Repair | |||
Lawnmower idle question | Electronics Repair | |||
Ohmwork | Home Repair | |||
White Gas, Coleman Fuel, and Unleaded Gasoline | Metalworking | |||
Briggs & Stratton 5HP engine won't stay running | Home Repair |