Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to alt.home.repair
carbonejim
 
Posts: n/a
Default Painting Grandmas House

Hi,

Grandma's house was last painted in the late seventies of early
eighties. It still looks good in most areas, except a certain wall has
a bubbling look and some paint has broken off in the top corner. Under
the paint I see a brown paper. It reminds me of construction paper in
texture.

I need advice on how to prepare and paint this wall.

I figure I will need to scand the wall, espeially in the places of the
loose paint. The I can paint over the wall.

BUT, I worry that this is a sign of drywall damage, or maybe wallpaper
deep under the paint?

Thanks,
Jim

  #2   Report Post  
Posted to alt.home.repair
 
Posts: n/a
Default Painting Grandmas House

probably wall paper I would try removing some, if you dont it will
peel more when you repaint

  #3   Report Post  
Posted to alt.home.repair
carbonejim
 
Posts: n/a
Default Painting Grandmas House

Dang! I didn't want to think that. Do you think I can try to remove
some in the corner to test if this is really wallpaper? Do you think a
steamer machine would be the best method?

-Jim

  #4   Report Post  
Posted to alt.home.repair
RicodJour
 
Posts: n/a
Default Painting Grandmas House

carbonejim wrote:
Dang! I didn't want to think that. Do you think I can try to remove
some in the corner to test if this is really wallpaper? Do you think a
steamer machine would be the best method?


Usually.

R

  #5   Report Post  
Posted to alt.home.repair
PipeDown
 
Posts: n/a
Default Painting Grandmas House


"RicodJour" wrote in message
oups.com...
carbonejim wrote:
Dang! I didn't want to think that. Do you think I can try to remove
some in the corner to test if this is really wallpaper? Do you think a
steamer machine would be the best method?


Usually.

R


Then again, the last coat did last over 20 years. You could wire brush the
loose stuff off, prime and paint as usual. Just depends on how long you
want it to last. Are you freshning up or prepping for sale? I'd be
inclined to paint over unless the blistering was severe and all over the
wall.

Main problem I see is the blistered areas come off, it may be hard to blend
that in if there is a step at the edge of the paper. Sanding should work
there though.

A steamer should work if there are not too many layers of paint on top of
the paper and that paint is not too waterproof. You will need to score the
surface first so the steam can get underneith. I think they sell scoring
tools specifically for that purpose.

Just be sure the paper you see is wallpaper. Brown in appearance also
sounds like the paper backing on wallboard which you definately do not want
to remove.




  #6   Report Post  
Posted to alt.home.repair
carbonejim
 
Posts: n/a
Default Painting Grandmas House

FYI. for future home repair novices,

I made another trip out to her house and peeled off more paint for a
closer look and to do some work. The brown paper under the paint was
wall board. I wonder why the paint peeled there? Maybe some moisture
got behind it. However, I don't see any reason to think this is a
problem that will occur again.

I took a scrapper and knocked off all the loose paint. Many layers
deep - once the walls and trim were painted torquise! I removed about
the area of about a square foot, the rest was on there good. The paint
removed was at least a millimeter thick that left a noticable
difference. I sanded the area and the rest of the wall to rough it up.
There were many, many bumps like they originally had crumbs in their
paint. Was this a style? The whole house has these inconsistent
bumps, but she never minded for this many years and they go back to
before the torquise color. I used a belt sander to clean most the
bumps up and touched things up by hand sanding. The paint that is on
there is like steel! I covered the area that was down to the wall
board with light joint compound usign a trowel. I also filled in some
nail holes and nicks on the entire wall. The process was pretty easy.
It did take some time to sand down that steel reinforced paint.

It looks pretty good so far. I left it to dry and won't be back for a
few weeks. Grandma doesn't mind the joint compound/sanded wall look
for now, she said it looks better than the wall peeling off.

Next time I'll lightly sand the rough spots down and put a layer of
primer on it. I'm going to match the paint color and finish it up with
a few coats. Entire project will cost $50 - $60. It's $40 now, but I
am yet to buy the matching paint.

Thanks,
Jim

  #7   Report Post  
Posted to alt.home.repair
Banty
 
Posts: n/a
Default Painting Grandmas House

In article .com, carbonejim
says...

FYI. for future home repair novices,

I made another trip out to her house and peeled off more paint for a
closer look and to do some work. The brown paper under the paint was
wall board. I wonder why the paint peeled there? Maybe some moisture
got behind it. However, I don't see any reason to think this is a
problem that will occur again.

I took a scrapper and knocked off all the loose paint. Many layers
deep - once the walls and trim were painted torquise! I removed about
the area of about a square foot, the rest was on there good. The paint
removed was at least a millimeter thick that left a noticable
difference. I sanded the area and the rest of the wall to rough it up.
There were many, many bumps like they originally had crumbs in their
paint. Was this a style? The whole house has these inconsistent
bumps, but she never minded for this many years and they go back to
before the torquise color. I used a belt sander to clean most the
bumps up and touched things up by hand sanding. The paint that is on
there is like steel! I covered the area that was down to the wall
board with light joint compound usign a trowel. I also filled in some
nail holes and nicks on the entire wall. The process was pretty easy.
It did take some time to sand down that steel reinforced paint.

It looks pretty good so far. I left it to dry and won't be back for a
few weeks. Grandma doesn't mind the joint compound/sanded wall look
for now, she said it looks better than the wall peeling off.

Next time I'll lightly sand the rough spots down and put a layer of
primer on it. I'm going to match the paint color and finish it up with
a few coats. Entire project will cost $50 - $60. It's $40 now, but I
am yet to buy the matching paint.


I had a recent adventure where I discovered that some walls were painted over
wallpaper, and the wallpaper preceded some remod work to create passthroughs,
leaving me with the edgebead on the corners on top of the wallpaper. Plus the
wallpaper adheres very, very well. In which case I patched and plan to paint
again (as a front up approach).

What you have is texture paint that used to be used much more often than it is
now. Sometimes it's a choice between live-with and repaint, mucho work, or just
drywalling again. I've gone all three directions.

Cheers,
Banty


--
NewsGuy.Com 30Gb $9.95 Carry Forward and On Demand Bandwidth

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
painting interior of a new house jIM Home Repair 16 October 27th 05 08:32 PM
Buying a house: Some questions Tony Home Ownership 8 August 17th 04 06:38 AM
house rebuilt year Djavdet Home Repair 27 February 20th 04 02:50 AM
house rebuilt year Djavdet Home Ownership 21 February 20th 04 02:50 AM
House Moisture JAG Home Repair 6 August 29th 03 06:53 PM


All times are GMT +1. The time now is 11:27 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"