Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to alt.home.repair
mm
 
Posts: n/a
Default New GE ignitor, but still explodes (somewhat)

Thanks again to several of you for all the help you've given.

Gas wall oven, GE model JGRP17WEW4WW. SN VZ636174Q

It now has a new ignitor, two days old, the third new one in 3 years
and still there is some explosion, like there was with the previous
one. (First two worked for a while each, then failed to light oven.)

Installed and tested about four times and everything fine on Sunday,
but today he reports:
Anne used the oven Monday - commented on the explosion.
I tried it this morning, Tuesday
Explosion that jiggled the door; then (I believe, after lit) it
had a small explosion.

It lit with the previous ignitor also, but on occasion exploded a bit,
once or twice quite loudly, and after that his wife refused to use
it.

What else might it be, or is this ignitor defective?

The valve?


BACKGROUND:
The ignitor is round (carborundum, right?)

The previous ignitor, 2 yrs old, was 92 ohms.
This one, before installation, was 580 ohms.
Both when cold.
That seems like a big difference.

The webpage said this kind of ignitor should show 2.5 to 3.0 amps
Sunday the previous ignitor, after it warmed for one second, showed
in test One 2.8 amps dropping pretty quickly to 2.44
in test Two 2.9 amps dropping pretty quickly to 2.39
so by the time the gas started flowing, the amperage was about 0.1 amp
below the minimum or 2.5

The new one started close to zero and gradually built up to 2.8 volts,
where it was when the gas went on. After two tests with the same
result, I dicsonnected the ammeter. It took between 1:30 and 2:00
minutes to light at first, but on the third and fourth times took less
than a minute.


We might have touched the metal cage around it, but no one touched the
surface of the ignitor.

My friend was away for a week, and this past sunday we put in a brand
new ignitor, from repairclinic.com, recommended here (which shipped
promptly, btw). It came in vinyl envelope that said Genuine GE
Replacement Parts, and I I'm sure it was. (In a corrugated cardboard
enveleope, in a cor. cardboard box.. I'm sure no damage in shipping.)





Remove NOPSAM to email me. Please let
me know if you have posted also.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Major Screwup by Gas Company - House Explodes Jeff Wisnia Home Repair 27 November 16th 05 11:54 PM


All times are GMT +1. The time now is 03:39 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"