I have a Magtag washer that dances during the spin cycles. I initially
thought is was doing this because the washer was not level. I leveled
the washer an it helped a little. Any ideas?

Tighten level nuts.

If that doesn't work and floor isn't concrete put a thick piece of plywood
under it.


"rich" wrote in message
oups.com...
I have a Magtag washer that dances during the spin cycles. I initially
thought is was doing this because the washer was not level. I leveled
the washer an it helped a little. Any ideas?

rich wrote:
I have a Magtag washer that dances during the spin cycles. I initially
thought is was doing this because the washer was not level. I leveled
the washer an it helped a little. Any ideas?

Does it creep across the floor? If so, all 4 feet are STILL not
secure.

If it just oscillates in the same location, seems normal to me. The
load is unbalanced.

http://www.repairclinic.com/0047_11.asp
has hover your mouse over parts descriptions and
http://fixitnow.com/
are the best sites to search.