Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Adding a cast iron radiator
I have recently completed finishing my unfinished attic (almost). The
attic had plaster walls and a wood floor installed, which seemed to me that they builder had intentions of finishing it. The house was built in 1850. There are also two pipes for a radiator run into the attic (cut through a shaped plank for that radiator to sit on). I want to start looking for a salvaged radiator but I want to make sure that I get the correct size. The pipes are about 43" apart. Most of the radiators that I see online are measured in height, not width. Any help in selecting a radiator would be greatl appreciated. Thanks, Tom |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
cast iron hinges | UK diy | |||
Experience with Cast Iron wheels vs Cast Aluminum | Woodworking | |||
Wrought Iron, Cast Alum and Cast Iron Decorative welding | Metalworking | |||
Cutting a 3" hole in cast-iron waste stack | Home Repair | |||
Cast Iron sewer -- Is it a hazard? | Home Ownership |