When set at 45 degrees for beveled cuts, the blade is not crooked and
touches the bottom slot.
Does anybody know how to adjust the blade? I did adjusted it for making
straight cuts.
Thanks.
Papen

"papen" wrote in message
oups.com...
When set at 45 degrees for beveled cuts, the blade is not crooked and
touches the bottom slot.
Does anybody know how to adjust the blade? I did adjusted it for making
straight cuts.
Thanks.
Papen


Check with your manual. Saws vary but it's not generally too hard to
accomplish. You may be accidentally missing a lock mechanism. If you
don't have a manual check with the Sears site - www3.sears.com