Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Electrical K&T retrofit
I'm replacing all my K&T wiring with Romax wiring. When I fish the new Romax
in the walls, do I need to staple it to the wood studs every few feet? If so that means I need to tear all the walls out. But all I see are electricians do is fish the wires down to the existing switches or receptacles and make the connections without stapling the Romax to the wood studs, not even within 6" from the boxes - is this ok with NEC? TIA |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Retrofit electrical ceiling boxes | Home Repair | |||
Overhead electrical service to a storage shed | Home Repair | |||
Installing Electrical Outlet In Sink Cabinet | Home Repair | |||
Installing Ceiling Fan with Red wire on electrical box. | Home Repair | |||
Forthcoming Building Regulations on electrical work (Part P) | UK diy |