Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Toilet Elevated
A friend of mine, his father is handicapped. I've been asked to elevate the
toilet a couple inches. Well, I've had toilets up. And replaced a flange one time. But, I'll admit that I don't know any way to elevate an entire toilet a couple inches. I did some net search, and found booster toilet seats, and electric patient lifters. But nothing for raising the entire toilet. Anyone done this, or have a link? -- Christopher A. Young Learn more about Jesus www.lds.org www.mormons.com |
#2
|
|||
|
|||
On 2005-05-23, Stormin Mormon wrote:
A friend of mine, his father is handicapped. I've been asked to elevate the toilet a couple inches. Toilets do come in two heights, standard height and ADA ("comfort") height. The latter is 2" taller. Perhaps a new ADA height toilet would be simplest? Yours, Wayne |
#3
|
|||
|
|||
Stormin Mormon wrote:
I did some net search, and found booster toilet seats, and electric patient lifters. But nothing for raising the entire toilet. Anyone done this, or have a link? Here you go Stormy: http://www.dynamic-living.com/toilevator.htm For about $100 more you can replace the entire toilet with a "comfort height" toilet and that might make for a nicer, cleaner installation. HTH. |
#4
|
|||
|
|||
Why wouln't you want to raise the seat?
"Stormin Mormon" wrote in message ... A friend of mine, his father is handicapped. I've been asked to elevate the toilet a couple inches. Well, I've had toilets up. And replaced a flange one time. But, I'll admit that I don't know any way to elevate an entire toilet a couple inches. I did some net search, and found booster toilet seats, and electric patient lifters. But nothing for raising the entire toilet. Anyone done this, or have a link? |
#5
|
|||
|
|||
A friend of mine, his father is handicapped. I've been asked to elevate the
toilet a couple inches. Well, I've had toilets up. And replaced a flange one time. But, I'll admit that I don't know any way to elevate an entire toilet a couple inches. I did some net search, and found booster toilet seats, and electric patient lifters. But nothing for raising the entire toilet. Anyone done this, or have a link? ----------- The only practical way to do this is but an ADA compliant toilet and install it. They're not very expensive. |
#6
|
|||
|
|||
Makes sense to me, but that wasn't the request.
-- Christopher A. Young Learn more about Jesus www.lds.org www.mormons.com "Noozer" wrote in message news:Spmke.1456012$6l.785105@pd7tw2no... Why wouln't you want to raise the seat? "Stormin Mormon" wrote in message ... A friend of mine, his father is handicapped. I've been asked to elevate the toilet a couple inches. Well, I've had toilets up. And replaced |
#7
|
|||
|
|||
Might... I'll have to google that idea. Thank you.
-- Christopher A. Young Learn more about Jesus www.lds.org www.mormons.com "Wayne Whitney" wrote in message ... On 2005-05-23, Stormin Mormon wrote: A friend of mine, his father is handicapped. I've been asked to elevate the toilet a couple inches. Toilets do come in two heights, standard height and ADA ("comfort") height. The latter is 2" taller. Perhaps a new ADA height toilet would be simplest? Yours, Wayne |
#8
|
|||
|
|||
On Mon, 23 May 2005 14:51:42 GMT, "Stormin Mormon"
wrote: A friend of mine, his father is handicapped. I've been asked to elevate the toilet a couple inches. Well, I've had toilets up. And replaced a flange one time. But, I'll admit that I don't know any way to elevate an entire toilet a couple inches. I did some net search, and found booster toilet seats, and electric patient lifters. But nothing for raising the entire toilet. Anyone done this, or have a link? http://www.azpartsmaster.com/shopazp...ODUCT_ID=9141E That site has a flange extension that you might need when raising the whole toilet. That plus a couple of new wax rings if needed, and possibly a longer water connection. I would cut out about 3 layers of 3/4 inch plywood and trim to fit and then set the toilet on that. Cover the exposed area with a 2 inch strip of vinyl floor tile and caulk generously. |
#9
|
|||
|
|||
"Stormin Mormon" wrote:
A friend of mine, his father is handicapped. I've been asked to elevate the toilet a couple inches. Well, I've had toilets up. And replaced a flange one time. But, I'll admit that I don't know any way to elevate an entire toilet a couple inches. I did some net search, and found booster toilet seats, and electric patient lifters. But nothing for raising the entire toilet. Anyone done this, or have a link? If it's an old-style (14 1/2" floor-to-bowl-rim) toilet, it might be a lot easier / cheaper to just buy a new toilet that's ADA compliant. That should add roughly two inches, and the labor will be minimal. |
#10
|
|||
|
|||
Stormin Mormon wrote:
A friend of mine, his father is handicapped. I've been asked to elevate the toilet a couple inches. Well, I've had toilets up. And replaced a flange one time. But, I'll admit that I don't know any way to elevate an entire toilet a couple inches. I did some net search, and found booster toilet seats, and electric patient lifters. But nothing for raising the entire toilet. Anyone done this, or have a link? I installed the Toilevator. It's a platform the toilet sits on, raising it by about three inches. It comes with foam gaskets, an extension for the waste pipe, and all the hardware. It took less than fifteen minutes to set up. I didn't install an ADA toilet because those have elongated bowls and that bowl style was too long for the area the toilet was in. I didn't use an elevated toilet seat because those are unstable and prone to slip around on the lip of the bowl, also they are messy to clean (trust me, you don't want to imagine it) and non-handicapped household members don't care to perch on a slidy untidy seat installed for the benefit of the handicapped person. I've had the Toilevator in place for the last three years. No leaks, no problems. Turns out family and visitors love it, because face it, folks, most toilets are far too low for the average adult to comfortably lower themselves onto, and then get up. Especially when you're tall and/or stiff and sore and/or elderly. I just wish toilet manufacturers would offer non-ADA (i.e. round bowl) commodes in different heights, since that'd be the simplest solution. Toilevator (they shoulda called it the ToiLift): http://www.allegromedical.com/bathro...evator.P191757 HellT |
#11
|
|||
|
|||
Hell Toupee wrote:
I've had the Toilevator in place for the last three years. No leaks, no problems. Turns out family and visitors love it, because face it, folks, most toilets are far too low for the average adult to comfortably lower themselves onto, and then get up. Especially when you're tall and/or stiff and sore and/or elderly. I just wish toilet manufacturers would offer non-ADA (i.e. round bowl) commodes in different heights, since that'd be the simplest solution. What makes a toilet ADA compliant is the height, not the shape of the bowl. Frankly, I'd never own a round one anyway. -- Mortimer Schnerd, RN VE |
#12
|
|||
|
|||
I've had the Toilevator in place for the last three years. No leaks,
no problems. Turns out family and visitors love it, because face it, folks, most toilets are far too low for the average adult to comfortably lower themselves onto, and then get up. Especially when you're tall and/or stiff and sore and/or elderly. I just wish toilet manufacturers would offer non-ADA (i.e. round bowl) commodes in different heights, since that'd be the simplest solution. What makes a toilet ADA compliant is the height, not the shape of the bowl. Frankly, I'd never own a round one anyway. --------- American Standard makes ADA height toilets in both round and elongated styles: http://www.americanstandard-us.com/P...=56&x=38&y =6 |
#13
|
|||
|
|||
Thank you, sir. That was just the boost he mighta needed.
-- Christopher A. Young Learn more about Jesus www.lds.org www.mormons.com "Travis Jordan" wrote in message m... Stormin Mormon wrote: I did some net search, and found booster toilet seats, and electric patient lifters. But nothing for raising the entire toilet. Anyone done this, or have a link? Here you go Stormy: http://www.dynamic-living.com/toilevator.htm For about $100 more you can replace the entire toilet with a "comfort height" toilet and that might make for a nicer, cleaner installation. HTH. |
#14
|
|||
|
|||
Abe wrote:
I've had the Toilevator in place for the last three years. No leaks, no problems. Turns out family and visitors love it, because face it, folks, most toilets are far too low for the average adult to comfortably lower themselves onto, and then get up. Especially when you're tall and/or stiff and sore and/or elderly. I just wish toilet manufacturers would offer non-ADA (i.e. round bowl) commodes in different heights, since that'd be the simplest solution. What makes a toilet ADA compliant is the height, not the shape of the bowl. Frankly, I'd never own a round one anyway. --------- American Standard makes ADA height toilets in both round and elongated styles: http://www.americanstandard-us.com/P...=56&x=38&y =6 That's great to learn. Back when I was looking for a taller toilet I couldn't find one that didn't have an elongated bowl. HellT |
#15
|
|||
|
|||
According to Stormin Mormon :
A friend of mine, his father is handicapped. I've been asked to elevate the toilet a couple inches. Well, I've had toilets up. And replaced a flange one time. But, I'll admit that I don't know any way to elevate an entire toilet a couple inches. I did some net search, and found booster toilet seats, and electric patient lifters. But nothing for raising the entire toilet. Anyone done this, or have a link? The simplest way is to "shim" up the base of an ordinary toilet with layers of plywood or 2x lumber. On new construction, this is very easy because you just mount the flange (higher) on the top of the raised base. You may want additional reinforcement under the floor to deal with the slightly higher leverage. [This meets our building code for handicapped toilets in semi-commercial buildings.] If you don't want to disturb an existing toilet flange, things get tricky. A local "real" plumbing shop should have flange extenders or other solutions less expensive than replacing the toilet with a "special". -- Chris Lewis, Una confibula non set est It's not just anyone who gets a Starship Cruiser class named after them. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
HELP... water leak at base of toilet when showering | Home Repair | |||
Replace toilet in CA due to mineral build-up?? | Home Ownership | |||
wax free toilet seal - experiences? | Home Repair | |||
Run on toilet paper predicted | Home Repair | |||
Help with toilet water supply and vibrating pipes | Home Repair |