Hi All,

I noticed an anode for swamp coolers advertised on
a web site. Not to ask too stupid a questions, but how
is this installed? Do you throw it into the tub? Or,
do you bury it in the ground (dirt) and run a wire to
to bottom of the cooler?

Many thanks,
--Tony

Tony wrote: I noticed an anode for swamp coolers advertised on
a web site. Not to ask too stupid a questions, but how
is this installed? Do you throw it into the tub? Or,
do you bury it in the ground (dirt) and run a wire to
to bottom of the cooler?

It's called a "sacrificial" anode, meant to be eaten up by any
galvanic response that would otherwise eat the cooler body.

"Anodes should come into contact with the metal part it will protect,
and the potential of any sacrificial anode needs to be at least 200
milliamps higher than the other metal components". So, I'd connect it
to the cooler body, and let the anode rest in the water. HTH. Tom

tom wrote:
Tony wrote: I noticed an anode for swamp coolers advertised on
a web site. Not to ask too stupid a questions, but how
is this installed? Do you throw it into the tub? Or,
do you bury it in the ground (dirt) and run a wire to
to bottom of the cooler?

It's called a "sacrificial" anode, meant to be eaten up by any
galvanic response that would otherwise eat the cooler body.

"Anodes should come into contact with the metal part it will protect,
and the potential of any sacrificial anode needs to be at least 200
milliamps higher than the other metal components". So, I'd connect it
to the cooler body, and let the anode rest in the water. HTH. Tom


Thank you.

How would you connect it in the winter when there is no water in it?

--Tony

Might I suggest you contact the company selling the things and ask them
about the install.

Secondly, why would you worry about it in the winter if there's no water
involved? Just leave
it there until summer when you re-fill.


"Anthony Ewell" wrote in message
...
tom wrote:
Tony wrote: I noticed an anode for swamp coolers advertised on
a web site. Not to ask too stupid a questions, but how
is this installed? Do you throw it into the tub? Or,
do you bury it in the ground (dirt) and run a wire to
to bottom of the cooler?

It's called a "sacrificial" anode, meant to be eaten up by any
galvanic response that would otherwise eat the cooler body.

"Anodes should come into contact with the metal part it will protect,
and the potential of any sacrificial anode needs to be at least 200
milliamps higher than the other metal components". So, I'd connect it
to the cooler body, and let the anode rest in the water. HTH. Tom


Thank you.

How would you connect it in the winter when there is no water in it?

--Tony

Anthony Ewell wrote:
Hi All,

I noticed an anode for swamp coolers advertised on
a web site. Not to ask too stupid a questions, but how
is this installed? Do you throw it into the tub? Or,
do you bury it in the ground (dirt) and run a wire to
to bottom of the cooler?

Many thanks,
--Tony

Surprisingly, were you to actually buy one of the things, the
installation instructions would come with it.

It has a wire with a terminal crimped on that you attach to the metal
frame above the water level. It comes with a plastic tray that isolates
the sacrificial anode from the metal below the water level. The tray
holds the anode below the water level and sort of catches the particle
flakes as the anode is "consumed." Its purpose is to let the anode
corrode away and not the metal frame.

--
Grandpa Koca - SAHD for 6 - Keeper of the Perpetual Kindergarten
My opinion is neither copyrighted nor trademarked. It is price
competitive. If you like, I'll trade for one of yours.

Grandpa Koca wrote:
Anthony Ewell wrote:

Hi All,

I noticed an anode for swamp coolers advertised on
a web site. Not to ask too stupid a questions, but how
is this installed? Do you throw it into the tub? Or,
do you bury it in the ground (dirt) and run a wire to
to bottom of the cooler?

Many thanks,
--Tony


Surprisingly, were you to actually buy one of the things, the
installation instructions would come with it.

It has a wire with a terminal crimped on that you attach to the metal
frame above the water level. It comes with a plastic tray that isolates
the sacrificial anode from the metal below the water level. The tray
holds the anode below the water level and sort of catches the particle
flakes as the anode is "consumed." Its purpose is to let the anode
corrode away and not the metal frame.


Thank you!