Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Would adding sprinkler on zone decrease pressure?
Last week I posted a topic on getting the right sprinkler heads for my
arborvitae plants. I planted 7 along the fence ( total length from end to end is 22') At each end is the existing sprinkler heads. I purchased 2 Toro end strip nozzles. They look like this: http://www.toro.com/sprinklers/fixed...les/53148.html After firing up my sprinklers I noticed the 2 arborvitae at the ends were not getting water,even after adjusting the sprinklers. One solutuion was to add a sprinkler head in the middle and use a center strip nozzle like this: http://www.toro.com/sprinklers/fixed...les/53147.html That would cover the entire 7 plants, including the ones at the ends. My question is would adding an additional sprinkler reduce pressure on this zone enough to affect the other heads that water my lawn. It is fed by 3/4 inch supply. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
lawn sprinkler pressure problem | Home Repair | |||
GFCI outlet / automated sprinkler system that plugs in it | Home Ownership | |||
Fault in combi boiler's pressure guage, and/or pressure-relief valve? | UK diy | |||
Charge pressure for sealed CH system | UK diy | |||
Expansion vessel and initial charge pressure. | UK diy |