Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
On Thu, 10 Feb 2005 18:00:40 -0600, someone wrote:
. what do i need besides wood and how do i clean it up afterward? TIA First you need a chimney sweep to come over, check it out, and make sure it is OK to use. Are you sure it is rated for wood? Are you certain there are no blockages or hazardous buildups if you have never used it? Afterwads, you need a metal bucket with raised bottom & a tight lid, sold for this purpose in a set with a metal scoop, so that you have someplace to put the bulk of the ashes. And during the fire - you have a screen for the front so that sparks do not jump out & set your floor on fire? DO NOT try to vacuum up the remaining ashes for a couple of DAYS so that a newb like you can be absolutely sure all the embers are out. (It is a classic tenderfoot trick to burn down their house by sucking live embers into their vacuum cleaner, which then later catches fire in the closet when nobody is looking.) Reply to NG only - this e.mail address goes to a kill file. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Suggestions on removing paint from INSIDE of a fireplace firebox? | Home Ownership | |||
Problem with gas fireplace | Home Ownership | |||
Putting a Wood Stove in an Old Fireplace | Home Repair | |||
Problem: Squirrel in Fireplace Insert! | Metalworking | |||
Fireplace dilemma | Home Repair |