Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Heating & Oil Question
Hello,
I have a furnace in my house with 2 engines. Sometimes, when they "squeak", I had a bit of oil though the oil input hole on the engine to make it stop and prevent seizing. The little can of oil I have used is very very oil, and only says "engine oil" on it. I have run out and at sears I saw a smiliar looking can. However it said "lubricating 3 in 1 oil t prevent rust... etc.." I have been told there is a difference to this lubricating oil and my old engine oil. Is there? Should I be using some different engline oil on my furance engines? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Heating Only not working | UK diy | |||
Return ducts in basement reducing heating efficiency?! | Home Repair | |||
Noisy new boiler when heating water only | UK diy | |||
Central Heating Question - Heating Loop | UK diy | |||
Central Heating Efficiency Question | UK diy |