In article .com,
gm3 wrote:
Hello,

I have a furnace in my house with 2 engines. Sometimes, when they
"squeak", I had a bit of oil though the oil input hole on the engine to
make it stop and prevent seizing.

The little can of oil I have used is very very oil, and only says
"engine oil" on it. I have run out and at sears I saw a smiliar looking
can. However it said "lubricating 3 in 1 oil t prevent rust... etc.."

I have been told there is a difference to this lubricating oil and my
old engine oil. Is there? Should I be using some different engline oil
on my furance engines?

Don't use 3 in 1. Its a lousy oil. Ask for a light or medium weight
machine oil. Not at sears though. Try an old fashioned hardware store
if you have one locally.

--
Rich Greenberg Marietta, GA, USA richgr atsign panix.com + 1 770 321 6507
Eastern time. N6LRT I speak for myself & my dogs only. VM'er since CP-67
Canines:Val, Red & Shasta (RIP),Red, husky Owner:Chinook-L
Atlanta Siberian Husky Rescue. www.panix.com/~richgr/ Asst Owner:Sibernet-L