maxlite compact fluorescent sks20eaww
20w
"listed e225999 y124" (FCC #?)
probably bought at a dollar store type store.
http://img92.imageshack.us/img92/783...bad42958xk.jpg

no other info because packaging gone missing.


recently i put it inot a two lamp fixture. after the light switch had been turned off a long
time, i reentered the room, and noticed this bulb was infrequently flashing, as if some kind
fo charge was building then discharging.

possible complicatoins.
3 way (2 locatoin) switch, this switch has the neon(?) indicator in the switch.
light fixture is the light kit part of a ceiling fan (the fan motor had not been running)
the other bulb is a different model (costco purchase) CF of mfr?, label: bpce13/t8.

further:
any other CF (including a 2nd costco) in the fan light, with this costco CF, does not cause
any bulb to flash.

this post is most likely a FYI, and not a problem that needs fixing, because the "flaky"
bulb does not flash where i've installed it in a fixture with 3 other bulbs (one is another CF,
one a halogen)

wrote:
....
recently i put it inot a two lamp fixture. after the light switch had been turned off a long
time, i reentered the room, and noticed this bulb was infrequently flashing, as if some kind
fo charge was building then discharging.
....

This is exactly what is happening. The light is getting a small current
from somewhere and this builds up in the internal power supply/inverter
and lights up the lamp briefly. This happens a lot with X10 controllers
because they send a 'sense' current through the light even when they
are turned off. If it's a multi-lamp fixture then a simple fix is to
put in a regular incandescent bulb in one socket. The resistance from
that bulb will drain off any small currents. Of course, if you don't
have some kind of remote controller like an X10 then you might want to
get an electrician out there to fix the wiring.

Anthony

wrote:
...
recently i put it inot a two lamp fixture. after the light switch had
been turned off a long time, i reentered the room, and noticed this
bulb was infrequently flashing, as if some kind fo charge was
building then discharging.

possible complicatoins.
3 way (2 locatoin) switch, this switch has the neon(?) indicator in
the switch. ..


That neon indicator on the switch is using the light as part of it's
circuit and that is the source of the power. Slight differences in designs
will cause some CFs to flicker and others not. Put another switch without
as indicator and the problem will go away.

I don't know if this could be a problem for the CF or not.


--
Joseph Meehan

Dia duit

"Joseph Meehan" wrote in message
. ..
wrote:
..
recently i put it inot a two lamp fixture. after the light switch had
been turned off a long time, i reentered the room, and noticed this
bulb was infrequently flashing, as if some kind fo charge was
building then discharging.

possible complicatoins.
3 way (2 locatoin) switch, this switch has the neon(?) indicator in
the switch. ..


That neon indicator on the switch is using the light as part of it's
circuit and that is the source of the power. Slight differences in
designs will cause some CFs to flicker and others not. Put another switch
without as indicator and the problem will go away.

I don't know if this could be a problem for the CF or not.


--
Joseph Meehan

Dia duit

There's likely no damage being done to the lamp. The current is a few mA --
not enough to seriously cause the cathodes of the CFL lamp to sputter.
That would shorten lamp life. Any other harmful damage would have to
involve heat or voltages beyond the standard line voltage.

TKM