Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
OK, I have the model numbers for my Ruud A/C. I also have some other values
that I have questions about. UAMB-036JAZ (two units) RLA 16.1 Volts 208-230 Fan 2.0 HP UAMB-018JAZ RLA 16.1 Volts 208-230 Fan 0.9 HP Why is the voltage listed as 208 to 230? My house has two phase power. Is there anything inside that shifts the phases of one of the lines to emulate a three phase supply? Is RLA the current draw when the compressor is operating? A quick google showed that I have 7.5 tons over three zones, so given a 12 SEER the system should draw 7.5kW when all three are running. Correct? Rick DeBay In article , TURTLE says... This is turtle. We HVAC peoples have air flow charts we have in telling what size we need for certian tonage units and I'm looking at one. Tell me what it is and I can look it up. If a 20'' x 20'' return grill will not let a 20'' X 20'' filter go in it. You have a big problem there for that is not suppose to happen at all. TURTLE |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
2nd floor return for A/C? | Home Repair | |||
Return ducts in basement reducing heating efficiency?! | Home Repair | |||
Air Conditioner Problem | Electronics Repair | |||
Horizontal mount window air conditioner | Home Ownership | |||
how do I ensure there is a cold water path to the boilers return | UK diy |