I need a 16v 220uF Capacitor. Anyone know where I can find one online?


--
.................................................. ............................

Chase after truth like hell and you'll free yourself, even though you never
touch its coat-tails.
-Clarence Darrow

.................................................. ............................
http://www.memeticcandiru.com

wrote in message
news:mUWHc.28427$eO.11190@edtnps89...
: I need a 16v 220uF Capacitor. Anyone know where I can find one
online?



Digikey lists three if you do the search.

In can.general Roger Gt wrote:

Digikey lists three if you do the search.

They do... Unfortunately, minimum order is $2000.

I only need ~5.


--
.................................................. ............................

"Become the change you wish to see in others"
-Mahatma Gandhi

.................................................. ............................
http://www.memeticcandiru.com

wrote in message
news:4YYHc.11527$iw3.1530@clgrps13...
In can.general Roger Gt wrote:

Digikey lists three if you do the search.

They do... Unfortunately, minimum order is $2000.

I only need ~5.

Do you really expect to find a vendor who has no minimum order and no
outrageous charges for small orders?

I wouldn't.

In can.general Norm Dresner wrote:

Do you really expect to find a vendor who has no minimum order and no
outrageous charges for small orders?

I dot expect that. All I ask is a vendor without minimum order.


--
.................................................. ............................

Truth is always the enemy of power. And power the enemy of truth.

.................................................. ............................
http://www.memeticcandiru.com

In article mUWHc.28427$eO.11190@edtnps89, j4m4l_
says...
I need a 16v 220uF Capacitor. Anyone know where I can find one online?



allelectronics.com
oselectronics.com

wrote in message
news:4YYHc.11527$iw3.1530@clgrps13...
: In can.general Roger Gt wrote:
:
: Digikey lists three if you do the search.
:
: They do... Unfortunately, minimum order is $2000.
:
: I only need ~5.
:

Bull droppings!

There is a $6.00 handling charge for over seas paperwork, plus
shipping. A $5.00 charge is the order id less that #25.00

Those Caps are more than that, so only the $6 and shipping apply.

I do business with Digikey all the time, never had any problem nor
a minimum order! (My buys for prototypes are usually about
$200.00 and they are prompt to ship.

Roger Gt

On Sat, 10 Jul 2004 21:11:28 GMT,
wrote:

In can.general Roger Gt wrote:

Digikey lists three if you do the search.

They do... Unfortunately, minimum order is $2000.

I only need ~5.

Where do you see that?

I found 4019PHCT-NT at $0.47, minimum order 1. However, you can buy
the same part in a box or reel, where the minimum order is 500 (but
they are only $0.22 that way).

Digikey's minimum order is US$25, I believe. I suspect that any
online supplier will have a minimum order value, as it simply is not
economic to process an order for $2.50 worth of parts.


--
Peter Bennett, VE7CEI
peterbb4 (at) interchange.ubc.ca
new newsgroup users info : http://vancouver-webpages.com/nnq
GPS and NMEA info: http://vancouver-webpages.com/peter
Vancouver Power Squadron: http://vancouver.powersquadron.ca

"Peter Bennett" wrote in message
news.com...
On Sat, 10 Jul 2004 21:11:28 GMT,
wrote:

In can.general Roger Gt wrote:

Digikey lists three if you do the search.

They do... Unfortunately, minimum order is $2000.

I only need ~5.

Where do you see that?

I found 4019PHCT-NT at $0.47, minimum order 1. However, you can buy
the same part in a box or reel, where the minimum order is 500 (but
they are only $0.22 that way).

Digikey's minimum order is US$25, I believe. I suspect that any
online supplier will have a minimum order value, as it simply is not
economic to process an order for $2.50 worth of parts.

Most have minimum orders.

http://www.allelectronics.com

has no mimimum but a $6 fixed S/H charge on all orders.

Norm

On Sat, 10 Jul 2004 21:11:28 GMT,
wrote:

In can.general Roger Gt wrote:

Digikey lists three if you do the search.

They do... Unfortunately, minimum order is $2000.

I only need ~5.

You never looked.

--

Boris Mohar

On Sat, 10 Jul 2004 21:36:40 GMT, "Norm Dresner"
wrote:

wrote in message
news:4YYHc.11527$iw3.1530@clgrps13...
In can.general Roger Gt wrote:

Digikey lists three if you do the search.

They do... Unfortunately, minimum order is $2000.

I only need ~5.

Do you really expect to find a vendor who has no minimum order and no
outrageous charges for small orders?

I wouldn't.


Try www.mouser.com . No minimum and generally good prices and
service. Or just stop in a Radio Shack and pay more than you could
have bought them mailorder&shipped.

-Chris

On Sat, 10 Jul 2004 21:11:28 GMT,
wrote:

They do... Unfortunately, minimum order is $2000.

??????? $2000 min order? Where did that come from?

I've done three $25ish orders in the last few weeks (it's amazing how
many ways I can find to blow up the same mos-fet driver, but that's a
different story..)

BTW, my $25+ orders were just so I wouldn't get hit with "HUGE" $5
surcharge on orders less than $25


BTW, Quick search at www.digikey.com for "220uF 16v" gives a bunch of
options. For instance (all with single unit min orders)

Two different Tantalum caps starting at $9.91

One specialty Polymer cap @ $3.08

Nine electrolytic caps starting @ $0.35

BTW, if your in the US, USPS Priority is cheaper than UPS ground, and
a whole heck of a lot faster (two days in my case)


Take Care,
James Lerch
http://lerch.no-ip.com/atm (My telescope construction, Testing, and Coating site)

Press on: nothing in the world can take the place of perseverance.
Talent will not; nothing is more common than unsuccessful men with talent.
Genius will not; unrewarded genius is almost a proverb.
Education will not; the world is full of educated derelicts.
Persistence and determination alone are omnipotent.
Calvin Coolidge

wrote in message
news:mUWHc.28427$eO.11190@edtnps89...
I need a 16v 220uF Capacitor. Anyone know where I can find one
online?

--

.................................................. .......................
......

Chase after truth like hell and you'll free yourself, even though you
never
touch its coat-tails.
-Clarence
Darrow

They're as common as dog doo-doo at websites such as Mouser and
Digi-Key.
We all wish you'd "Chase after" your parts "like hell" by doing a simple
google search for them.

wrote in message
news:d1_Hc.11538$iw3.358@clgrps13...
In can.general Norm Dresner wrote:

Do you really expect to find a vendor who has no minimum order
and no
outrageous charges for small orders?

I dot expect that. All I ask is a vendor without minimum order.

There are dozens if not hundreds of vendors on Ebay who'll do that for
you. Norm, you're just not looking in the right places. ;-)

BTW, I wish these clueless ISPs that allow you people to post to
nonexistent newsgroups such as sci.electronics would get a clue. That
newsgroup was removed and replaced by the current sci.electronics.*
structure 6 or more years ago. It shouldn't _be_ there.

--

"Peter Bennett" wrote in message
news.com...
On Sat, 10 Jul 2004 21:11:28 GMT,
wrote:

In can.general Roger Gt wrote:

Digikey lists three if you do the search.

They do... Unfortunately, minimum order is $2000.

I only need ~5.

Where do you see that?

I found 4019PHCT-NT at $0.47, minimum order 1. However, you can buy
the same part in a box or reel, where the minimum order is 500 (but
they are only $0.22 that way).

Digikey's minimum order is US$25, I believe. I suspect that any
online supplier will have a minimum order value, as it simply is not
economic to process an order for $2.50 worth of parts.

The vendors on Ebay don't seem to think that's true. They'll sell you a
few bucks of parts and ship 'em for a couple dollars.

And there are plenty of vendors there that are from the UK, judging by
the number of prices that are listed in GBP.

--
Peter Bennett, VE7CEI

On Sun, 11 Jul 2004 10:50:29 -0700, "Watson A.Name - \"Watt Sun, the Dark
Remover\"" wrote:

The vendors on Ebay don't seem to think that's true. They'll sell you a
few bucks of parts and ship 'em for a couple dollars.

And there are plenty of vendors there that are from the UK, judging by
the number of prices that are listed in GBP.

We've propably got some 220/16V radials on the shelf here or at work, if the OP
gives me a mailing address I'll throw some in a jiffy bag for free, but he'll
have to pay the airmail postage.

We have a couple of million resistors and capacitors of all types in the
workshop downstairs, I'll have to make up a list so I can get them moved on,
they take up a LOT of room! Elco's we don't hold on to, only ceramics, poly and
some of the high-range Tant's.

Peter

--
Peter & Rita Forbes

Engine pages for preservation info:
http://www.oldengine.org/members/diesel

In can.general Roger Gt wrote:

Bull droppings!

There is a $6.00 handling charge for over seas paperwork, plus
shipping. A $5.00 charge is the order id less that #25.00

Those Caps are more than that, so only the $6 and shipping apply.

As far as the web interface goes, I picked the cap I wanted, and entered a
quantity of "5". It wouldn't let me proceed, until I entered a quantity
of 2000.

Perhaps there are ways around this, but the web interface was quite clear.


--
.................................................. ............................

"After we become a strong force as the result of the creation of the state,
we shall abolish partition and expand to the whole of Palestine. "

- Isreali founding father David Ben-Gurion

.................................................. ............................
http://www.memeticcandiru.com

In can.general "Watson A.Name - \"Watt Sun, the Dark Remover\"" wrote:

There are dozens if not hundreds of vendors on Ebay who'll do that for
you. Norm, you're just not looking in the right places. ;-)

Excellent suggestion! Just found a few!

Thanks,
Dan.




--
.................................................. ............................

"After we become a strong force as the result of the creation of the state,
we shall abolish partition and expand to the whole of Palestine. "

- Isreali founding father David Ben-Gurion

.................................................. ............................
http://www.memeticcandiru.com

In can.general James Lerch wrote:

I've done three $25ish orders in the last few weeks (it's amazing how
many ways I can find to blow up the same mos-fet driver, but that's a
different story..)

BTW, my $25+ orders were just so I wouldn't get hit with "HUGE" $5
surcharge on orders less than $25

It sounds like I turn a wrong turn somewhere. I found the part I needed,
but the web interface wouldn't let me order less than 2000.

--
.................................................. ............................

"After we become a strong force as the result of the creation of the state,
we shall abolish partition and expand to the whole of Palestine. "

- Isreali founding father David Ben-Gurion

.................................................. ............................
http://www.memeticcandiru.com

In can.general Peter A Forbes wrote:

We've propably got some 220/16V radials on the shelf here or at work, if the OP
gives me a mailing address I'll throw some in a jiffy bag for free, but he'll
have to pay the airmail postage.

Thank you for your kind offer, sir - I've already found a few closer to home
on Ebay.



--
.................................................. ............................

One hundred percent of the shots you don't take don't go in

-Wayne Gretzky

.................................................. ............................
http://www.memeticcandiru.com

wrote in message
news:QJhIc.24645$Rf.22502@edtnps84...
: In can.general Roger Gt wrote:
:
: Bull droppings!
:
: There is a $6.00 handling charge for over seas paperwork, plus
: shipping. A $5.00 charge is IF the order is less than #25.00
:
: Those Caps are more than that, so only the $6 and shipping
apply.
:
: As far as the web interface goes, I picked the cap I wanted, and
entered a
: quantity of "5". It wouldn't let me proceed, until I entered
a quantity
: of 2000.
:
: Perhaps there are ways around this, but the web interface was
quite clear.


Well, select the part that is not a Reel lot component! Sort for
BULK and it will accept the entry for "5" It is really very
simple to do, jus follow the directions. BTW the part you listed
showed 0 in stock!

On Sun, 11 Jul 2004 20:58:42 GMT, wrote:

In can.general Peter A Forbes wrote:

We've propably got some 220/16V radials on the shelf here or at work, if the OP
gives me a mailing address I'll throw some in a jiffy bag for free, but he'll
have to pay the airmail postage.

Thank you for your kind offer, sir - I've already found a few closer to home
on Ebay.

Way to go :-)) Glad you have got sorted out OK.

Peter

--
Peter & Rita Forbes

Engine pages for preservation info:
http://www.oldengine.org/members/diesel

On Sun, 11 Jul 2004 06:23:43 GMT, the renowned
(James Lerch) wrote:

On Sat, 10 Jul 2004 21:11:28 GMT,
wrote:

They do... Unfortunately, minimum order is $2000.

??????? $2000 min order? Where did that come from?

I've done three $25ish orders in the last few weeks (it's amazing how
many ways I can find to blow up the same mos-fet driver, but that's a
different story..)

;-)

BTW, my $25+ orders were just so I wouldn't get hit with "HUGE" $5
surcharge on orders less than $25

Yup. I usually have one big order for a major project, with maybe one
small one in advance and one or two afterward. There are always supply
items that can be added on to bring the small ones up to the 25
US/32.50 C$ level.

Sometimes having that virtual stock can save the customer money- I was
able to go through two iterations of ordering samples (the first was
auto-cancelled after a week due to a problem with the zip code or
something) and get the "free" parts from Asia in the same time frame
as the multilayer board samples took, secure in the knowledge that if
they didn't show up in time Digikey could provide them overnight for
$100.

Best regards,
Spehro Pefhany
--
"it's the network..." "The Journey is the reward"
Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog Info for designers: http://www.speff.com

on Sunday 11 July 2004 10:44 am, Watson A.Name - "Watt Sun, the Dark
Remover" wrote:


wrote in message
news:d1_Hc.11538$iw3.358@clgrps13...
In can.general Norm Dresner wrote:

Do you really expect to find a vendor who has no minimum order
and no
outrageous charges for small orders?

I dot expect that. All I ask is a vendor without minimum order.

There are dozens if not hundreds of vendors on Ebay who'll do that for
you. Norm, you're just not looking in the right places. ;-)

BTW, I wish these clueless ISPs that allow you people to post to
nonexistent newsgroups such as sci.electronics would get a clue. That
newsgroup was removed and replaced by the current sci.electronics.*
structure 6 or more years ago. It shouldn't _be_ there.

--

So, should I unsubscribe?
--
Cheers!
Rich

wrote in message
news:4YYHc.11527$iw3.1530@clgrps13...
In can.general Roger Gt wrote:

Digikey lists three if you do the search.

They do... Unfortunately, minimum order is $2000.

I only need ~5.



Give

http://www.rscomponents.com/

a try.

They have a retail division called Electromail. It's the same catalogue
though and they stock a huge amount of stuff.

Hi,

Where is the $2000 minimum order specified?

According to the Digikey web site:

A $5 handling charge is added to your order if the subtotal is less than
$25.
6.5 percent sales tax is added to your order if the shipping address is in
Minnesota.
International orders (excluding Canada) will have a $6.00 processing fee
added to your order.
All duties and taxes are the responsibility of the customer.

I've heard this $2000 bit before....

John.

"nemo" wrote in message
...

wrote in message
news:4YYHc.11527$iw3.1530@clgrps13...
In can.general Roger Gt wrote:

Digikey lists three if you do the search.

They do... Unfortunately, minimum order is $2000.

I only need ~5.



Give

http://www.rscomponents.com/

a try.

They have a retail division called Electromail. It's the same catalogue
though and they stock a huge amount of stuff.

The *other* John Miller wrote:

I've heard this $2000 bit before....

You probably heard it here, from someone who was looking at prices in the
"components on reels" section instead of the individual parts.

--
The real John Miller
Email address: domain, n4vu.com; username, jsm

"Send lawyers, guns and money..."
-Lyrics from a Warren Zevon song