Home |
Search |
Today's Posts |
#1
![]()
Posted to alt.electronics
|
|||
|
|||
![]()
Hi,
I have a Sony head unit (CDX-MP70) RMS 23x4 Peak 52x4. I have it hooked up to 4 Infinity Kappa 62.5i 6.5 speakers. When I turn up the volume maybe a little less than half way or more on the head unit the unit cuts out/shuts off, then in about 5 seconds it pops back on and continues playing, but will cut out again if I don't lower the volume. From what I understand the head unit should handle the speakers no problem. Can anyone shed some light on what might be the problem? The head unit (in the back) does get warm-hot but not real hot to the touch. No water damage or other phsyical damage has been done. Thanks for any info. -Matt |
#2
![]()
Posted to alt.electronics
|
|||
|
|||
![]() "Matt" wrote in message ... | Hi, | | I have a Sony head unit (CDX-MP70) RMS 23x4 Peak 52x4. I have it hooked up | to 4 Infinity Kappa 62.5i 6.5 speakers. When I turn up the volume maybe a | little less than half way or more on the head unit the unit cuts out/shuts | off, then in about 5 seconds it pops back on and continues playing, but will | cut out again if I don't lower the volume. What impedence are the speakers? What impedence does the headunit support? |
#3
![]()
Posted to alt.electronics
|
|||
|
|||
![]()
Head Unit: Sony, CDX-MP70, Speaker impedance 4-8 ohms, Max power output 52W
x 4 (at 4 ohms) Speakers: Infinity Kappa 62.5i, Impedance 4, RMS Power Range (Watts) 2-75, Peak Power Handling (Watts) 225 "Calab" wrote in message news:YLRek.1402$nD.336@pd7urf1no... "Matt" wrote in message ... | Hi, | | I have a Sony head unit (CDX-MP70) RMS 23x4 Peak 52x4. I have it hooked up | to 4 Infinity Kappa 62.5i 6.5 speakers. When I turn up the volume maybe a | little less than half way or more on the head unit the unit cuts out/shuts | off, then in about 5 seconds it pops back on and continues playing, but will | cut out again if I don't lower the volume. What impedence are the speakers? What impedence does the headunit support? |
#4
![]()
Posted to alt.electronics
|
|||
|
|||
![]() Do you have the ground for each speaker tied together? "Matt" wrote in message ... | Head Unit: Sony, CDX-MP70, Speaker impedance 4-8 ohms, Max power output 52W | x 4 (at 4 ohms) | Speakers: Infinity Kappa 62.5i, Impedance 4, RMS Power Range (Watts) 2-75, | Peak Power Handling (Watts) 225 | | | "Calab" wrote in message news:YLRek.1402$nD.336@pd7urf1no... | | | "Matt" wrote in message | ... | | Hi, | | | | I have a Sony head unit (CDX-MP70) RMS 23x4 Peak 52x4. I have it hooked | up | | to 4 Infinity Kappa 62.5i 6.5 speakers. When I turn up the volume maybe | a | | little less than half way or more on the head unit the unit cuts | out/shuts | | off, then in about 5 seconds it pops back on and continues playing, but | will | | cut out again if I don't lower the volume. | | What impedence are the speakers? What impedence does the headunit support? | | | |
#5
![]()
Posted to alt.electronics
|
|||
|
|||
![]()
what do you mean by tied together? from the head unit each speaker pair has
positive and negative which is connected to the speaker positive and negative.... not sure i understand your question completely... i have it wired pretty much like this: http://www.siocommunications.co.uk/W...dio_wiring.jpg Could it be the wires, no big enough gauge? Fuse, but if it was fuse it would blow not just cut out right? "Calab" wrote in message news:8UTek.69519$kx.56432@pd7urf3no... Do you have the ground for each speaker tied together? "Matt" wrote in message ... | Head Unit: Sony, CDX-MP70, Speaker impedance 4-8 ohms, Max power output 52W | x 4 (at 4 ohms) | Speakers: Infinity Kappa 62.5i, Impedance 4, RMS Power Range (Watts) 2-75, | Peak Power Handling (Watts) 225 | | | "Calab" wrote in message news:YLRek.1402$nD.336@pd7urf1no... | | | "Matt" wrote in message | ... | | Hi, | | | | I have a Sony head unit (CDX-MP70) RMS 23x4 Peak 52x4. I have it hooked | up | | to 4 Infinity Kappa 62.5i 6.5 speakers. When I turn up the volume maybe | a | | little less than half way or more on the head unit the unit cuts | out/shuts | | off, then in about 5 seconds it pops back on and continues playing, but | will | | cut out again if I don't lower the volume. | | What impedence are the speakers? What impedence does the headunit support? | | | |
#6
![]()
Posted to alt.electronics
|
|||
|
|||
![]() Hrm... What I meant was + going to each speaker and the - from each speaker joined together (or to the car frame). Doesn't like like you do though. The only time I've had a stereo doing that was when the speakers were too low an impedence, so the amp got too hot and shut off to protect itself. I don't think it would be fuses, but a self resetting circuit breaker. "Matt" wrote in message ... | what do you mean by tied together? from the head unit each speaker pair has | positive and negative which is connected to the speaker positive and | negative.... not sure i understand your question completely... i have it | wired pretty much like this: | http://www.siocommunications.co.uk/W...dio_wiring.jpg | | Could it be the wires, no big enough gauge? Fuse, but if it was fuse it | would blow not just cut out right? | | | "Calab" wrote in message | news:8UTek.69519$kx.56432@pd7urf3no... | | Do you have the ground for each speaker tied together? | | "Matt" wrote in message | ... | | Head Unit: Sony, CDX-MP70, Speaker impedance 4-8 ohms, Max power output | 52W | | x 4 (at 4 ohms) | | Speakers: Infinity Kappa 62.5i, Impedance 4, RMS Power Range (Watts) | 2-75, | | Peak Power Handling (Watts) 225 | | | | | | "Calab" wrote in message | news:YLRek.1402$nD.336@pd7urf1no... | | | | | | "Matt" wrote in message | | ... | | | Hi, | | | | | | I have a Sony head unit (CDX-MP70) RMS 23x4 Peak 52x4. I have it | hooked | | up | | | to 4 Infinity Kappa 62.5i 6.5 speakers. When I turn up the volume | maybe | | a | | | little less than half way or more on the head unit the unit cuts | | out/shuts | | | off, then in about 5 seconds it pops back on and continues playing, | but | | will | | | cut out again if I don't lower the volume. | | | | What impedence are the speakers? What impedence does the headunit | support? | | | | | | | | | |
#7
![]()
Posted to alt.electronics
|
|||
|
|||
![]() "Matt" wrote in message ... Hi, I have a Sony head unit (CDX-MP70) RMS 23x4 Peak 52x4. I have it hooked up to 4 Infinity Kappa 62.5i 6.5 speakers. When I turn up the volume maybe a little less than half way or more on the head unit the unit cuts out/shuts off, then in about 5 seconds it pops back on and continues playing, but will cut out again if I don't lower the volume. From what I understand the head unit should handle the speakers no problem. Can anyone shed some light on what might be the problem? The head unit (in the back) does get warm-hot but not real hot to the touch. No water damage or other phsyical damage has been done. It does not like being played loud and perhaps does not like your speakers. The protection circuit is kicking in. Higher impedance speakers would probably help. |
#8
![]()
Posted to alt.electronics
|
|||
|
|||
![]()
On Jul 14, 4:54*pm, "Matt" wrote:
Hi, I have a Sony head unit (CDX-MP70) RMS 23x4 Peak 52x4. *I have it hooked up to 4 Infinity Kappa 62.5i 6.5 speakers. *When I turn up the volume maybe a little less than half way or more on the head unit the unit cuts out/shuts off, then in about 5 seconds it pops back on and continues playing, but will cut out again if I don't lower the volume. *From what I understand the head unit should handle the speakers no problem. *Can anyone shed some light on what might be the problem? *The head unit (in the back) does get warm-hot but not real hot to the touch. *No water damage or other phsyical damage has been done. Thanks for any info. -Matt Assuming there are not short circuits in the wiring, it is possible the unit is not getting enough current...meaning the power wire is not large enough, or that the unit is drawing its power from vehicle's fuse block through a circuit breaker (normally found only on the headlight circuit). Try running the primary power lead directly to the battery's (+) terminal...using 18 or 16 gage wire. Does it cut off still? |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Cutting simple curve by hand | Woodworking | |||
How to connect JVC Stereo Cassete Deck(KD-AD2),Stereo Integrated Amplifier(A-S7),Stereo Tuner(T-V3) to RCA Television(FMR 7277ER) | Electronics Repair | |||
Simple Question I should know the answer to! Plumbing... | Home Repair | |||
Sansui 661 stereo receiver cutting out | Electronics Repair | |||
TECHNICS Stereo Amp Problem | Electronics Repair |