Home |
Search |
Today's Posts |
#1
|
|||
|
|||
hd4780 LCD problem
This is my first LCD and I am not having much luck. I have checked over
my wiring many many times and cannot seem to find the problem. It is a 4x20 hd4780 LCD. When I turn it on the backlight comes on and I receive the test signal, but some lines are missing. The top 4 squares, or I guess pixels, are on but then the next 2 down are not. The bottom 2 are also on. Here is an example of one character: ***** ***** ***** ***** ***** This is repeated for each character on the 1st and 3rd line of the LCD. Is this a bad LCD or do I have my wiring wrong? Also, I can use LCD Smartie and the LCD will respond but I can only make out some characters, but most of the screen is gibberish. How can I go about fixing this problem? Any help will be appreciated. Thanks, Chris |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Outside drain problem... Who is responsible? | UK diy | |||
SONY 35" Dual PIP -Video Blackout Problem | Electronics Repair | |||
Paslode IM250A Cordless Finish Nailer, Stripped Treads Problem | Woodworking | |||
Widespread problem with HP Omnibook XE3-GFs? | Electronics Repair | |||
Problem with retrace lines on EIZO F55S... | Electronics Repair |