Home |
Search |
Today's Posts |
#1
|
|||
|
|||
OPAMP with input of 0-5V output of +/-5v
Hello
This is my first post to alt.electronics. I have no formal electronics training but have completed quite a few DIY projects ( Digital and Analogue) from the net and elsewhere. At the moment I am working on a Printerport (lpt) dac using the Quad 8bit DAC Max506. This chip has a rail-to-rail output voltage (0-5V) for the application I need +/-5v. I know (think an opamp is the solution. However I am still bamboozled by some of the tech jargon on the datasheets. If anyone knows of a solution off the top of their heads I would really appreciate it. if not I will report back with a couple of chips data sheets and ask for some guidance. If you need more info I can email my project so far Kurt |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Alesis DM5 drum module - low output level. | Electronics Repair | |||
Designing a circuit to control heater output temp depending on temp of an input | Electronics | |||
Vintage R12R Ampeg - guitar amplifier - lack of audio output gain - need help | Electronics Repair | |||
Dodgy JVC RGB SCART socket input | Electronics Repair | |||
Composite video output to "AV in" input? | Electronics Repair |