Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
NEC AccuSync 120, 21" inch monitor, pre warmup vertical stabliaztion issue
I have an NEC AccuSync 120 when I turn it on in the morning the
display will be about 1/4" taller on the top and bottom than I have it set. Suddenly the display will zoom in, expand out at the top and bottom, just as it gets most exagarated the CRT goes dark but the green power light stays lit. After 5 or 10 minutes when it is warmed up, I push the power button and it works normally and the image is no longer 1/4" larger at the top and bottom. What could be causing this? |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Washing machine drain backs up! | Home Repair | |||
Big threads with 1-1/2 inch Beall Thread cutter | Woodworking | |||
Bowl Saving: A Comprehensive Discussion | Woodturning | |||
When Is A Half Inch Dowel Not A Half Inch Dowel? | Woodworking |