Home |
Search |
Today's Posts |
![]() |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
![]() |
|||
|
|||
![]()
Just a follow up for those who care,
After adjusting the grid bias down enough for the dots to go away all day, I found the signal to be too weak. I dug into it to fix it properly, and traced it down to an IC, forgot which number it is, but it's a Tl072ACP, an 8 pin dip on the hv board. Thanks for the help, got us back up and running again! Thanks, Steve Kamego |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Surface ground water problem | Home Repair | |||
Water Pump / Pressure Tank Problem !!!!!! | Home Repair | |||
AV problem with philips 32PW6005 | Home Repair | |||
Wiring problem | Home Repair | |||
Problem with retrace lines on EIZO F55S... | Electronics Repair |