Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Veritas R8 burgular system problem
Alarm activates for no apparent reason engineer replaced battery and
fuse, said fuse had blown and battery was low so replaced them both still having same problem red tamper light lights up, can anyone email installation manual Mac osx user |
#2
|
|||
|
|||
|
#3
|
|||
|
|||
Alarm system are a security issue. They do not supply any tech
information to non authorized service reps. Call back your alarm service rep for proper repairs. These systems are modular, and are serviced at the modular level. The power supply board may have to be changed, or the monitoring module may be defective (depending on the exact nature of the fault). If you have a zone that is giving a false indication, this may be the wire or connection to that zone device that is defective, or the device itself. As for myself, I have had the occasional failure of a motion detector, or a module, or something along that line. Jerry G. ======= |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Hot water system problem... | UK diy | |||
Delta method good enough to fail entire A/C system? | Home Repair | |||
New system nightmare | UK diy | |||
Bowl Saving: A Comprehensive Discussion | Woodturning | |||
mains Hot water, and do I convert open heating to a closed heating system | UK diy |