Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Tech: Tron Monitor - Signs of Life - Issues Remain
Tech: Repairing a WG19k4906 Arcade Montior from a Tron Cabinet
---------------------------------------------------------------------------- ---------- A step in the right direction tonight. I resoldered a few of the jumper wires on the 130VDC trace along the front edge of the WG4906 PCB. I now have a picture of sorts on screen wheras before I had nothing. Current issues a 1. REALLY bad horizontal (vertical for tron) tearing (or is it bleeding?) , nearly 2 inches long. 2. It appears I have three images on screen, or the picture is rolling so much I am getting an animation, picket fence effect and seeing three images. 3. Was not quite able to get the image to stabilize vertically (that is really horizontally for Tron, but vertically as the monitor sits now) Anyone have any ideas on any one or more of the three issues? Pics he http://forum.arcadecontrols.com/inde...html#msg291163 Project Blog He http://home.earthlink.net/~rescuetron/ |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
OT Guns more Guns | Metalworking |