Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Convergence board problem? Help please
I have a Hitachi 50 projection tv with a strange problem, When I turn
it on it turns right back off, but if I unplug the convergence board it turns on( yes the convergence is off though) then I turn the TV off plug the convergence ribbon back in and the TV will fire up and run as usual. no problems, I can turn it off and back on within an hour or so and it will work fine. The next day, same problem, then I have to go through the whole deal with plugging and unplugging the ribbon. Any suggestions would be great email me directly or post here thanks |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Printed Board update, problem solved for now | Woodturning | |||
Hitachi 43FDX01b Looks like Digicon board problem? | Electronics Repair | |||
Sony 53XBR35 Pincushion/convergence problem | Electronics Repair | |||
Problem with retrace lines on EIZO F55S... | Electronics Repair | |||
Toshiba Rear Projection TV convergence and power problem | Electronics Repair |