Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
canon copier problem
I have the pc-3 and its worked well till lately,the sliding glass carriage on top moves freely in one direction but binds the other way unless its been in a 75 degree room for a while. what type of lube is used on the white gears? I dont see any,or what else could be causing this. |
#2
|
|||
|
|||
Luddite wrote in message ...
I have the pc-3 and its worked well till lately,the sliding glass carriage on top moves freely in one direction but binds the other way unless its been in a 75 degree room for a while. what type of lube is used on the white gears? I dont see any,or what else could be causing this. Use a silicone-based lubricant or moly grease. Don't use petrochemical-based lubricants on plastic gears, as the gears will soften and become damaged. -k |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Canon DM-MV20E camera problem | Electronics Repair | |||
Surface ground water problem | Home Repair | |||
Water Pump / Pressure Tank Problem !!!!!! | Home Ownership | |||
Problem with new water heater (electric) - please advice | Home Ownership | |||
Problem with retrace lines on EIZO F55S... | Electronics Repair |