Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
RCA 100 PFR repair help - no video
Hi all,
I had a RCA PFR 100 projection tv handed to me. All three CRT's power up but then the Blue and green shut down and no video can be seen even on the red crt. When switched to "Aux" video input, without a signal I get all three CRT's to power up but the moment I feed it a video signal the Blue and green CRT's shut down. Anyone have any suggestions or a schematic for this TV? Thanks Jay |
#2
|
|||
|
|||
jay wrote: Hi all, I had a RCA PFR 100 projection tv handed to me. All three CRT's power up but then the Blue and green shut down and no video can be seen even on the red crt. When switched to "Aux" video input, without a signal I get all three CRT's to power up but the moment I feed it a video signal the Blue and green CRT's shut down. Anyone have any suggestions or a schematic for this TV? Thanks Jay |
#3
|
|||
|
|||
I did some more poking around, and looks like I see the retrace from
the Red CRT and ocassionally the blue and green, but very blurry, anyone have any ideas? Thanks Jay |
#4
|
|||
|
|||
http://www.manuals4you.com/
try here "jay" wrote in message oups.com... jay wrote: Hi all, I had a RCA PFR 100 projection tv handed to me. All three CRT's power up but then the Blue and green shut down and no video can be seen even on the red crt. When switched to "Aux" video input, without a signal I get all three CRT's to power up but the moment I feed it a video signal the Blue and green CRT's shut down. Anyone have any suggestions or a schematic for this TV? Thanks Jay |
#6
|
|||
|
|||
What chassis is in the beast?
It is way too old for our information, so need chassis to help. CTC132 variant? David jay wrote: Hi all, I had a RCA PFR 100 projection tv handed to me. All three CRT's power up but then the Blue and green shut down and no video can be seen even on the red crt. When switched to "Aux" video input, without a signal I get all three CRT's to power up but the moment I feed it a video signal the Blue and green CRT's shut down. Anyone have any suggestions or a schematic for this TV? Thanks Jay |
#7
|
|||
|
|||
I am looking at the chassis it says VP1 on it. Sam's photofacts seems
to carry this so I will check with my local library maybe they can find me a copy. I played around a bit more with the TV, The main problem seems to be the Red CRT tube staying on all the time, I can see the retracelines from the Red CRT so maybe I need to focus on that. I can make out faint outlines on the projection screen if I increase the intensity of the blue and red crt's but the red still drowns out the other colors. Maybe the shutdown of the Blue and Green is a side effect of the Red staying constantly on. Thanks Jay |
#8
|
|||
|
|||
Well no luck at the local libraries, based on some more reading I am
doing sounds like I have a red oversaturation problem? |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Woodturning e-Book and DVD Video, Vol. 2 | Woodturning | |||
Video of Iron Fever Expo | Metalworking | |||
FA: Sony Video 8 Player Recorder(broken parts Repair) EV-C3 | Electronics Repair | |||
Technics SA-DX1050 A/V Receiver: Intermittent video | Electronics Repair | |||
video producer seeking home inspection company to produce how-to video | Home Ownership |