Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Guy .S
 
Posts: n/a
Default sony handycam video8

Help,
i have to repair a Sony Handycam Video HI8
the problem is ; vertical stripes displaying from left
to right . Fading to nothing on the right side, but very visible in the
viewfinder as well as on the recorded tape
mostly on the left hand side.
Has anyone seen a problem of this nature before.
Thanks
Guy


  #2   Report Post  
 
Posts: n/a
Default

What's the model # of this Handycam?
These are known to have problems with the "fish caps" ESR all those
little "can" caps you see, esp in the video section.

Richard

  #3   Report Post  
 
Posts: n/a
Default

Wow sorry about the multiple posts. I have no idea how that happened.

  #4   Report Post  
 
Posts: n/a
Default

What's the model # of this Handycam?
These are known to have problems with the "fish caps" ESR all those
little "can" caps you see, esp in the video section.

Richard

  #5   Report Post  
 
Posts: n/a
Default

What's the model # of this Handycam?
These are known to have problems with the "fish caps" ESR all those
little "can" caps you see, esp in the video section.

Richard



  #6   Report Post  
Guy .S
 
Posts: n/a
Default

Richard

the odel number is CCD-TR101

Guy
a écrit dans le message de
ups.com...
What's the model # of this Handycam?
These are known to have problems with the "fish caps" ESR all those
little "can" caps you see, esp in the video section.

Richard



  #7   Report Post  
Guy .S
 
Posts: n/a
Default

Richard
what do you mean ERS all those?
are these caps replacable or just reheating them does the job?
Guy

"Guy .S" a écrit dans le message de
...
Richard

the odel number is CCD-TR101

Guy
a écrit dans le message de
ups.com...
What's the model # of this Handycam?
These are known to have problems with the "fish caps" ESR all those
little "can" caps you see, esp in the video section.

Richard





  #8   Report Post  
 
Posts: n/a
Default

Hey Guy,
No, they need to be replaced if bad. I use an ESR meter. Search this
group for "ESR" or "testing capacitors" for an explanation of how to
test these caps. They are know to go bad and often have a fishy smell,
hence fish caps. Also search for how to replace them. I use a low
wattage iron and lift them gently they sit on little feet. Sony boards
are usually pretty good but you have to be careful about lifting the
traces. I order my replacements from Mouser.Check out:
http://www.mouser.com/catalog/620/458.pdf
for an example.
Richard

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with Sony Handycam CCD-TRV57 [email protected] Electronics Repair 1 October 7th 04 03:06 PM
Sony Handycam ccd-f55 viewfinder pinout Matthew Domb Electronics Repair 5 May 22nd 04 07:28 PM
Sony Handycam CCC-F350E Juergen Nuesslein Electronics Repair 2 October 13th 03 08:36 PM
Sony Handycam CCD-TRV65 will not power up Norm Electronics Repair 1 August 24th 03 12:45 PM
Operating Manual For Sony Handycam? Marvin Rosen Electronics Repair 0 July 18th 03 02:45 PM


All times are GMT +1. The time now is 06:39 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"