Home |
Search |
Today's Posts |
![]() |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
![]() |
|||
|
|||
![]()
Attempting to repair a JVC AV-31BM4 TV, main board label reads SG61026A
with tuner CEEM245. First problem with the set was a red tint on the picture, found a 15K resistor was open on the crt board. Testing the set further revealed the tuner problem. The set will not receive any tv or cable channels through the tuner. 32V, 12V and 5V at tuner look ok AGC reads 7.2V. Autodetecting or manually adding channels didn't make any difference. The AV jacks work so using an external tuner is a possibility, but while I have this set apart on the bench, any ideas or known tuner problems with this set? Thanks, Tim B. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Convergence problem with Pioneer P5073 projection TV? | Electronics Repair | |||
Problem with Fender LTB power amplifier | Electronics Repair | |||
Goldstar CNR-2994P Tuner problem | Electronics Repair | |||
Problem with new water heater (electric) - please advice | Home Repair | |||
CRT Contrast Problem | Electronics Repair |