Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Compaq Monitor 5500
Replaced CRT No color adjustments inside, no OS menu for color, a
little to bright showing background raster with red tint. I would like to lower G2 but no adjustment on FB. 15 pin VGA connector using two pins to micro inside, For what? Can some monitors be adjusted thru the video controller via the PC. Or is it factory adjust thru VGA connector? |
#2
|
|||
|
|||
On 1 Jan 2005 13:02:34 -0800, "george" wrote:
Replaced CRT No color adjustments inside, no OS menu for color, a little to bright showing background raster with red tint. I would like to lower G2 but no adjustment on FB. 15 pin VGA connector using two pins to micro inside, For what? Can some monitors be adjusted thru the video controller via the PC. Or is it factory adjust thru VGA connector? There is a hidden factory menu; here is the procedure to access it - Factory preset Timings Adjustment: A. Press MENU Key to show OSD window press Up or Down Key to switch the functional controls. B. Press the Up Key to select the "EXIT" function, then press the MENU Key. While do not release the MENU Key until the OSD window changed to the Factory preset window. C. The Factory preset window contains the following functional controls. Select one of the control. Then press the Up/Down Key to adjust its value for the optimum picture. Wayne |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Compaq Armada 7770DMT | Electronics Repair | |||
Compaq V700 monitor | Electronics Repair | |||
testing compaq power supply ? | Electronics Repair |