Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Casper Vegt
 
Posts: n/a
Default TV turns to standby after falling of bed

Hi,

One week ago my TV fell of my bed, making a turn of 90 degrees and 40cm.
Now the TV turns in standby mode after choosing a channel, I don't have any
picture anymore.
Anyone maybe knows what is defective?

It's a 62cm Panasonic TV(5 years old).

Tnx in advance




  #2   Report Post  
 
Posts: n/a
Default

Casper Vegt wrote:
One week ago my TV fell of my bed, making a turn of 90 degrees and 40cm.
Now the TV turns in standby mode after choosing a channel, I don't have any
picture anymore.
Anyone maybe knows what is defective?
It's a 62cm Panasonic TV(5 years old).


Most likely a circuit board is cracked. Often around the line output
transformer. From your question, I take it you don't have much
experience in electronics repair? Also, you could turn to
nl.hobby.elektronica for advice in Dutch, and maybe find someone in your
neighbourhood that can have a look at it for you.

---
Met vriendelijke groet,

Maarten Bakker.
  #3   Report Post  
Sam Goldwasser
 
Posts: n/a
Default

"Casper Vegt" writes:

One week ago my TV fell of my bed, making a turn of 90 degrees and 40cm.
Now the TV turns in standby mode after choosing a channel, I don't have any
picture anymore.


Anyone maybe knows what is defective?


Something physically broke, probably the circuit board.

It's a 62cm Panasonic TV(5 years old).


You were sleeping with your 27 inch TV?

You'll have to get a professional to look at it. Could be relatively
simple. But could also be not worth fixing.

--- sam | Sci.Electronics.Repair FAQ Mirror: http://repairfaq.ece.drexel.edu/
Repair | Main Table of Contents: http://repairfaq.ece.drexel.edu/REPAIR/
+Lasers | Sam's Laser FAQ: http://repairfaq.ece.drexel.edu/sam/lasersam.htm
| Mirror Sites: http://repairfaq.ece.drexel.edu/REPAIR/F_mirror.html

Note: These links are hopefully temporary until we can sort out the excessive
traffic on Repairfaq.org.

Important: Anything sent to the email address in the message header above is
ignored unless my full name is included in the subject line. Or, you can
contact me via the Feedback Form in the FAQs.
  #4   Report Post  
Jerry G.
 
Posts: n/a
Default

It sounds like the circuit board in the set may be damaged, or something is
mechanically broken. You will have to send out the set for proper service,
unless you are experienced at this type of repair.

Why were you in bed with your TV set??? Interesting...

--

Jerry G.
======


"Casper Vegt" wrote in message
...
Hi,

One week ago my TV fell of my bed, making a turn of 90 degrees and 40cm.
Now the TV turns in standby mode after choosing a channel, I don't have any
picture anymore.
Anyone maybe knows what is defective?

It's a 62cm Panasonic TV(5 years old).

Tnx in advance





  #5   Report Post  
 
Posts: n/a
Default


On 26-Dec-2004, "Jerry G." wrote:

You will have to send out the set for proper service,
unless you are experienced at this type of repair.


For some sets the IR remote sensor is on a plug/skt
fly lead. Something may have got dislodged or come
unplugged.


  #6   Report Post  
 
Posts: n/a
Default


On 26-Dec-2004, "Jerry G." wrote:

Why were you in bed with your TV set??? Interesting...


There's too much sex on TV anyway.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
TV turns to standby Casper Vegt Home Repair 5 January 1st 05 05:14 PM
standby mode consumption vs longevity Sam Electronics Repair 3 October 23rd 04 05:09 AM
Estimating the Number of Turns of an Inductor Watson A.Name - \Watt Sun, the Dark Remover\ Electronics Repair 88 June 14th 04 01:45 PM
RCA TV CTC169 (BG5) F35750ST Wont come out of standby - Ticking sound when Power button is pressed Electronics Repair 0 September 25th 03 06:25 PM
more info RCA TV CTC169(BG5) Wont come out of standby - Ticking sound when Power button is pressed Electronics Repair 3 September 25th 03 01:29 AM


All times are GMT +1. The time now is 06:05 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"