Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Erik
 
Posts: n/a
Default Sansui cd-x711 cd-player several problems!

Thanks for all help!

I got it going again. What I did? I resoldered some weak connections,
wiggled all connections, replaced a belt that uppers and lowers the
optical deck. Then assembled everything correctly, the previous owner
was a moron that totally assembled it incorrectly.

Now it works! But I got a strange problem though. Suddenly after I
played some tracks of the disc inserted, and decided to test another
disc I realized that it totally hang up and nothing worked. I managed
to get the other disc out and tested the first disc. Totally dead. I
took the cover off again. The pickup didnt return to home. I moved it
further against the edge of the disc and tested again. Now it returned
to home. Solution: Never stop the disc at a track in the middle,
always go to first or last track. If I should forget this, you only
have to tilt the player to move the pickup right.

Strange fault though, anyone got an idea what it could be?

Thanks for all help anyway!

/Erik
  #2   Report Post  
Mark D. Zacharias
 
Posts: n/a
Default

Clean the contacts of the inside switch and make sure the carriage motor and
moving parts are good. Clean-lube where necessary, test the motor
electrically to make sure the brushes aren't opening up, lube the shaft of
the motor, just general maintenance. Easier said than done, eh?

Mark Z.


"Erik" wrote in message
om...
Thanks for all help!

I got it going again. What I did? I resoldered some weak connections,
wiggled all connections, replaced a belt that uppers and lowers the
optical deck. Then assembled everything correctly, the previous owner
was a moron that totally assembled it incorrectly.

Now it works! But I got a strange problem though. Suddenly after I
played some tracks of the disc inserted, and decided to test another
disc I realized that it totally hang up and nothing worked. I managed
to get the other disc out and tested the first disc. Totally dead. I
took the cover off again. The pickup didnt return to home. I moved it
further against the edge of the disc and tested again. Now it returned
to home. Solution: Never stop the disc at a track in the middle,
always go to first or last track. If I should forget this, you only
have to tilt the player to move the pickup right.

Strange fault though, anyone got an idea what it could be?

Thanks for all help anyway!

/Erik



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Sansui cd-x711 cd-player several problems! Erik Electronics Repair 5 December 9th 04 03:10 AM
Carrier Heat Pump Control Problems Art Renkes Home Repair 4 November 2nd 04 12:03 AM
tig welding problems drew j. Metalworking 4 November 25th 03 09:48 PM
DVD Player Kills Family of Seven family Electronics Repair 10 October 5th 03 12:12 AM
Need to install fan in DVD player... Robert Morein Electronics Repair 1 July 30th 03 03:34 AM


All times are GMT +1. The time now is 06:44 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"