I have a Dell 991 Trinitron monitor that when cold looses communication with
my PC during a refresh
It only does it when I first go on line ... after it warms up it's fine
None of the settings have been changed since first installed about 2 years
ago ... it is still connected to the same PC.

It wouldn't do it every time at first but after 2 months it's doing it every
time I go on line.

Any suggestions?

Tom

There are most likely some components that have become thermo sensitive in
the signal path, or sync processing. Capacitors, when aged have a greater
tendency of becoming thermo sensitive. With proper troubleshooting this can
be serviced. If the emission of the CRT is still very strong, it may be
worth to send it out for proper service.

--

Jerry G.
======


"invntrr" wrote in message
news:F%osd.1515$wa3.1105@trnddc02...
I have a Dell 991 Trinitron monitor that when cold looses communication with
my PC during a refresh
It only does it when I first go on line ... after it warms up it's fine
None of the settings have been changed since first installed about 2 years
ago ... it is still connected to the same PC.

It wouldn't do it every time at first but after 2 months it's doing it every
time I go on line.

Any suggestions?

Tom