 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
kenwood cassettedeck X-45 5Volt
Hi all,
I have a problem with a audio cassette player Kenwood X-45 The deck won't switch on. The +5 Volt dc is very low, just 4.69 Volt. Possible that the reset is referenced to the 5 Volt. Looks like a zener diode which is out of spec. Does someone has a schematic drawing for me. Or a repair suggestion. Thanks in advance PP eddumweer at hotmail dot com --- Outgoing mail is certified Virus Free. By avg anti virus system Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.782 / Virus Database: 528 - Release Date: 22-10-2004 |
|
#2
|
|||
|
|||
|
I have had the same problem.
Sorry, still do! Mine is at the 4.7v mark. It eventaully works to a certain degree if left in the standby state for a few hours. Then the display comes on. After attempting to play a tape the cassette just cuts out and the display dissappears. I would love to know what it is. I did repair two dry joints near the power input but to no avail. Quote:
|
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| kenwood cassettedeck X-45 5Volt | Electronics Repair | |||
| Security Code on Kenwood CD player | Electronics Repair | |||
Linear Mode
