 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
mag. fp5240
have mag fp5240w104 that blows hot and r961 on start-up any ideas? thanks
|
|
#2
|
|||
|
|||
|
Check the ESR on all the associated caps. Make sure that the horiz drive
is working correctly, and make very sure that the flyback has no shorted turns. Many times, in TV sets, and monitors, I have had a bad flyback cause this. -- Jerry G. ====== "458" wrote in message lkaboutelectronicequipment.com... have mag fp5240w104 that blows hot and r961 on start-up any ideas? thanks |
|
#3
|
|||
|
|||
|
Also check if B+ is too high
"Jerry G." wrote in message ... Check the ESR on all the associated caps. Make sure that the horiz drive is working correctly, and make very sure that the flyback has no shorted turns. Many times, in TV sets, and monitors, I have had a bad flyback cause this. -- Jerry G. ====== "458" wrote in message lkaboutelectronicequipment ..com... have mag fp5240w104 that blows hot and r961 on start-up any ideas? thanks --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.772 / Virus Database: 519 - Release Date: 01-Oct-04 |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
