 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
NAD 7020e has its signals crossed
NAD 7020e receiver just failed most strangely. If only one source is connected to the appropriate input (such as CD),
the signal can be heard on both channels at about 1/2 volume when tape monitor or video is selected. Tuner is also audible regardless of which input is selected. I've disassembled it and cleaned contacts etc to no avail. There's no visible damage under illuminated magnifier. tia in advance for help Nigel |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Question on splitting cable signals.... | Home Repair | |||
| Do capacitors allow or block ac signals? | Electronics | |||
| audio signals crossed | Electronics Repair | |||
| Analog vs Digital signals | Electronics | |||
Threaded Mode
