Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Aiwa HV-MX1 FF/REW problem
After 8 trouble free years my Aiwa HV-MX1 VCR has started having
intermittent problems with FF and REW. Sometimes it works fine other times it will not FF or REW. When it fails the take up spool (terminology?) will spin slower than normal and the free running spool (terminology?) will have the brake applied. The brake is stronger that the take up so the tape does not move at all. The mechanism, however, continues to try and drive it until you intervene. Simply press STOP and it may work properly on the next try. Anyone got any ideas what may be causing this behaviour. Is it likely a logic issue i.e. the processor or a feedback problem i.e. mode switch or something else altogether? All other functions appear to work correctly. TIA, Dave |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Problem with Fender LTB power amplifier | Electronics Repair | |||
Boiler Problem Gradually Getting Worse | UK diy | |||
Problem with AIWA CD plyer... | Electronics Repair | |||
CRT Contrast Problem | Electronics Repair |