Menu

Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Broken Bayonet bulb socket

Search this Thread

#1

Report Post

Posted to rec.antiques.radio+phono,sci.electronics.repair

Peter Jason Peter Jason is offline

Peter Jason is offline

external usenet poster

Posts: 32

Default

Broken Bayonet bulb socket

On Tue, 09 Apr 2019 18:26:50 -0500,
wrote:

I have an antique tube type radio (FM tuner) from 1947. It's a
"Pilotuner" model 601. It has a #47 bulb for the dial light. The socket
is one of the kinds that you squeeze the sides and it clamps into the
front dial plate. The bulb is a bayonet type, so there is a spring below
the bulb base.

Of all the years I've worked on old tube gear, I never had this happen.
I removed the bulb and the wire fell out the rear of the socket. I'm
sure finding a replacement socket wont be easy, so I'm trying to repair
this broken one. From what I see, that wire is soldered into the center
of the insulated piece below the bulb. (I think???). But getting a
soldering iron into that small hole along with a solder sucker to remove
the old solder seems to be a big challenge. Not to mention how much heat
that tiny insulated piece can handle. Taking it apart by the spring is
not an option since they pressed the metal inward and I wont even
attempt to mess with that.

Have any of you successfully repaired one of these?
Any suggestions or tips appreciated.

If nothing else, I suppose I can epoxy a plain socket to that clamp.

Try....
http://www.s-lilley.co.uk/?q=products

Reply With Quote

Reply With Quote

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2 socket, 3 socket, 4 socket 13A outlets	[email protected]	UK diy	8	January 31st 19 08:14 PM
Constitutionality of light bulb ban questioned - Environmental Protection Agency must be called for a broken bulb	metspitzer	Home Repair	199	July 3rd 08 04:49 AM
UK question: ES light bulb better than bayonet?	Lars	UK diy	298	January 7th 06 09:10 PM
Bayonet lampholder for outside lantern?	Mike Abbott	UK diy	5	February 13th 05 10:15 PM
Another CORGI gas question: bayonet connections	rrh	UK diy	3	May 31st 04 10:10 PM

All times are GMT +1. The time now is 09:18 PM.

About Us

"It's about DIY & home improvement"

Contact Us DIY Banter Forum Home Privacy Statement