This is for the archives -- thanks to Logan B.

-----------------------------------------------------------

With signal to monitor (ie. computer on), but power off:

1) Press and hold center button while turning power on.
2) Keep holding center button down during degauss cycle.
3) You will be shown a service menu login
4) Release center button
5) Push center once to select first position digit
6) Press center repeatedly to scroll through digits
7) Press right button to enter.
8) Operation is timed, so first attempts may fail.
9) Code is 7711

----------------------------------------------------------

Highly suggest copyng down all the data values before attempting to change
any of them. that way you have a basis to go back to. Don't trust your
memory regarding this, just too many flippin ##### to keep track of, pen and
paper are a needed friend in these instances.
"Ryan Underwood" wrote in message
news
This is for the archives -- thanks to Logan B.

-----------------------------------------------------------

With signal to monitor (ie. computer on), but power off:

1) Press and hold center button while turning power on.
2) Keep holding center button down during degauss cycle.
3) You will be shown a service menu login
4) Release center button
5) Push center once to select first position digit
6) Press center repeatedly to scroll through digits
7) Press right button to enter.
8) Operation is timed, so first attempts may fail.
9) Code is 7711

----------------------------------------------------------