I have a faulty psu. 45 rpm can not be selected at all. On 33 the motor runs
for about 5 sec and then stalls. (the voltage drops from about 60 to 20
volts at this time.

The two large 7 watt resistors are running very hot and a faint smell of
overheating is apparent.

I have no circuit diagram so it's a little difficult to get going on this
one. Any Linn experts out there?

I would be grateful if you could also reply to my work email. (Telecine at
trevorbrown dot demon dot co dot uk)

Thanks in advance.