Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Trying to find power supply for external CD burner
Hello everyone,
I am trying to find a power supply for the HP CD Writer Plus 7500e external CD burner which I inherited. I've located the exact replacement on HP's web site. However, they want $66 + $14 for a cable to plug it in. I'm hoping that I can find something cheaper. The requirements for the CD burner are stated as +5V DC, 1.2A, +12V DC, 0.8A. I'm under the impression that if the voltage and polarity are correct (i.e., +5V and +12V) then any supply rated at greater than 1.2A for +5V and 0.8A for +12V will work without damaging the CD burner and without damaging the power supply. Is that correct? I'm guessing that this kind of a power supply has to be a common part for many consumer electronics gadgets. However, I can't seem to locate the exact thing. Most of the hits I get for "power supply" are much larger (say 50--100W). What's the best way to go about finding a suitable substitute for HP's exact replacement? Is there a specific term for "low power 5 and 12 V DC consumer electronics power supply" ?? I know this is pretty simple-minded. Thanks for any info! Robert Dodier |
#2
|
|||
|
|||
Trying to find power supply for external CD burner
Take it out of the case and use it as a internal drive, usually all it is,
is a usb to IDE adaptor and a IDE cd-rom drive inside. Hook it up like a normal drive and let it burn, of course you should check the unit to make sure, this is just my experiance with similar units that have come into my position. Good luck, -glasnostJDC "Robert Dodier" wrote in message om... Hello everyone, I am trying to find a power supply for the HP CD Writer Plus 7500e external CD burner which I inherited. I've located the exact replacement on HP's web site. However, they want $66 + $14 for a cable to plug it in. I'm hoping that I can find something cheaper. The requirements for the CD burner are stated as +5V DC, 1.2A, +12V DC, 0.8A. I'm under the impression that if the voltage and polarity are correct (i.e., +5V and +12V) then any supply rated at greater than 1.2A for +5V and 0.8A for +12V will work without damaging the CD burner and without damaging the power supply. Is that correct? I'm guessing that this kind of a power supply has to be a common part for many consumer electronics gadgets. However, I can't seem to locate the exact thing. Most of the hits I get for "power supply" are much larger (say 50--100W). What's the best way to go about finding a suitable substitute for HP's exact replacement? Is there a specific term for "low power 5 and 12 V DC consumer electronics power supply" ?? I know this is pretty simple-minded. Thanks for any info! Robert Dodier |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Non-standard ATX power supply - Vectra | Electronics | |||
Quality Of Tools | UK diy | |||
12V DC mobile power supply (battery pack) | Electronics | |||
Power problems and how to find a good electrician? | UK diy | |||
Advice wanted: running crt filament w/extrnal power supply | Electronics Repair |