 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
mitsubishi and 4507 r convergence problem
You've most likely got a bad convegence IC; common problem on all projection
sets. Don't mess with the control pots if you're not very sure what you're doing. Get someone qualified to check it out; repairs are not that expensive for this problem, and you should get good use out of set. |
|
#2
|
|||
|
|||
|
mitsubishi and 4507 r convergence problem
Have the tech go thru the complete set and check for bad caps. If you want
to keep this set in opration for a peroid of time. "BWL" wrote in message ... You've most likely got a bad convegence IC; common problem on all projection sets. Don't mess with the control pots if you're not very sure what you're doing. Get someone qualified to check it out; repairs are not that expensive for this problem, and you should get good use out of set. |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
