mitsubishi and 4507 r convergence problem
 

You've most likely got a bad convegence IC; common problem on all projection
sets. Don't mess with the control pots if you're not very sure what you're
doing. Get someone qualified to check it out; repairs are not that expensive
for this problem, and you should get good use out of set.

mitsubishi and 4507 r convergence problem
 

Have the tech go thru the complete set and check for bad caps. If you want
to keep this set in opration for a peroid of time.
"BWL" wrote in message
...
You've most likely got a bad convegence IC; common problem on all
projection
sets. Don't mess with the control pots if you're not very sure what you're
doing. Get someone qualified to check it out; repairs are not that
expensive
for this problem, and you should get good use out of set.