Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Daewoo DTQ-2023FC TV part
I need a Tuning Control IC for this TV and I don't
like the Daewoo's price ($25.68 with shipping) . Is there any other source of these? It is a Toshiba TMP47C434N-3119. Actually, the price isn't that bad if it were only a one-time replacement, but this is the second failure. The chip gets temperature sensitive and then the remote control functions don't work properly. I don't think I'll be able to keep it cool enough in the summer using just a fan. ---Jeff |
#2
|
|||
|
|||
Daewoo DTQ-2023FC TV part
I need a Tuning Control IC for this TV and I don't
like the Daewoo's price ($25.68 with shipping) . Is there any other source of these? It is a Toshiba TMP47C434N-3119. There's no other option because it's a special programmed microprocessor IC. $25 is cheap for a microprocessor. I've seen them as high as $100. Ron |
#3
|
|||
|
|||
Daewoo DTQ-2023FC TV part
ospam (RonKZ650) wrote: There's no other option because it's a special programmed microprocessor IC. $25 is cheap for a microprocessor. I've seen them as high as $100. Ron Well, I was able to find at least one other source: http://www.shopelectronica.com/ The total cost including shipping is $24.00, $1.68 less than when ordering from Daewoo. ---Jeff |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
How do I figure out the diameters so I will have a nice screw fit? | Metalworking | |||
Old Delta drill press part?? | Metalworking |