Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
TEAC AD-600 microcontroller reset
What is the procedure for resetting the microcontroller in a Teac AD-600 cd
player. I have 2 of them that came into the shop last week. The units do not respond to any buttons. The display shows a play indication, and the counter, etc. The disc eject buttons do not respond. The tape functions do not respond either. It appears that the controller is not resetting and not letting anything work. Thanks, Bill Renfro Christian Technology |
#2
|
|||
|
|||
TEAC AD-600 microcontroller reset
Can't supply the info you wanted, but you might check to see if one of the
front-panel buttons is stuck, or a tact-switch damaged internally - shorted or leaky that is. Mark Z. -- Please reply only to Group. I regret this is necessary. Viruses and spam have rendered my regular e-mail address useless. "Bill Renfro" wrote in message ... What is the procedure for resetting the microcontroller in a Teac AD-600 cd player. I have 2 of them that came into the shop last week. The units do not respond to any buttons. The display shows a play indication, and the counter, etc. The disc eject buttons do not respond. The tape functions do not respond either. It appears that the controller is not resetting and not letting anything work. Thanks, Bill Renfro Christian Technology |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
GYYR question? Head replace "timer reset" | Electronics Repair | |||
RCD tripped & will not reset | UK diy | |||
TEAC PCD124 CD player jumps | Electronics Repair |