Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Any hope for this TV
Would someone have a look at this TV screen. The fix could be easy but
beyond me right now. http://www.islandnet.com/~roger/TVmonitor.html Roger |
#2
|
|||
|
|||
Any hope for this TV
Maybe, maybe not.
If the failure is in the degauss circuit or due to a big magnet being too close to the tv, relatively simple fix with the right tools and training. If the tv was dropped and the shadow mask was damaged, it needs a new picture tube to correct the problem. If the yoke has shifted or someone screwed with the yoke adjustments, only time needed by someone with the experience and training to do the adjustments with the proper test signal generator. David Roger wrote in message ... Would someone have a look at this TV screen. The fix could be easy but beyond me right now. http://www.islandnet.com/~roger/TVmonitor.html Roger |
#3
|
|||
|
|||
Any hope for this TV
The set may have been dropped, and the mask in the tube was damaged.
The degaussing coil is not working properly. The CRT was exposed to a strong magnet and requires a proper degaussing. The deflection yoke, and purity magnets may be out of alignment. This also means a full convergence alignment. Because I can see some rings or curved lines (looks like Newton Rings), from experience when I have seen these, it was usually the mask in the CRT that was damaged. -- Greetings, Jerry Greenberg GLG Technologies GLG ========================================= WebPage http://www.zoom-one.com Electronics http://www.zoom-one.com/electron.htm ========================================= "Roger" wrote in message ... Would someone have a look at this TV screen. The fix could be easy but beyond me right now. http://www.islandnet.com/~roger/TVmonitor.html Roger |
#4
|
|||
|
|||
Any hope for this TV
"Roger" wrote in message ... Would someone have a look at this TV screen. The fix could be easy but beyond me right now. http://www.islandnet.com/~roger/TVmonitor.html Roger Was it dropped? If not then the repair should be almost trivial. |
#5
|
|||
|
|||
Any hope for this TV
"James Sweet" wrote in message news:o5AAb.325146$275.1084414@attbi_s53...
"Roger" wrote in message ... Would someone have a look at this TV screen. The fix could be easy but beyond me right now. http://www.islandnet.com/~roger/TVmonitor.html Roger Was it dropped? If not then the repair should be almost trivial. Moire pattern caused by interference between screen and shadow mask, tube stuffed. |
#6
|
|||
|
|||
Any hope for this TV
Well, I sought out the previous owner and she says it was dropped. Dang!
But I know more now anyway. Thanks for the help Roger In article , "David" wrote: Maybe, maybe not. If the failure is in the degauss circuit or due to a big magnet being too close to the tv, relatively simple fix with the right tools and training. If the tv was dropped and the shadow mask was damaged, it needs a new picture tube to correct the problem. If the yoke has shifted or someone screwed with the yoke adjustments, only time needed by someone with the experience and training to do the adjustments with the proper test signal generator. David Roger wrote in message ... Would someone have a look at this TV screen. The fix could be easy but beyond me right now. http://www.islandnet.com/~roger/TVmonitor.html Roger |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Simple problem with basin waste (I hope) | UK diy | |||
Revenge (I hope) | UK diy |