 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
source for part needed or info on wot it is
Hi
My mate has managed to damage his imobaliser while fitting it. There is a small black semicircle with the number A733P95C on it It has 3 legs on it, 1 of which has broken I am sorry this is all the info he has given me I am not very good with electrics. Thanks Gareth |
|
#2
|
|||
|
|||
|
source for part needed or info on wot it is
"Gaz" wrote in message ... Hi My mate has managed to damage his imobaliser while fitting it. There is a small black semicircle with the number A733P95C on it It has 3 legs on it, 1 of which has broken I am sorry this is all the info he has given me I am not very good with electrics. Thanks Gareth It's probably a transistor, but that part number didn't show up in any of my searches. If it's just a broken leg it's probably possible to repair it, if it needs to be replaced some more info will be needed. |
|
#3
|
|||
|
|||
|
source for part needed or info on wot it is
Yep - its a Transistor. 2SA733
Pretty common Part, and the NTE290A Will sub for it. "Gaz" wrote in message ... Hi My mate has managed to damage his imobaliser while fitting it. There is a small black semicircle with the number A733P95C on it It has 3 legs on it, 1 of which has broken I am sorry this is all the info he has given me I am not very good with electrics. Thanks Gareth |
|
#4
|
|||
|
|||
|
source for part needed or info on wot it is
Yep - its a Transistor. 2SA733
Pretty common Part, and the NTE290A Will sub for it. "Gaz" wrote in message ... Hi My mate has managed to damage his imobaliser while fitting it. There is a small black semicircle with the number A733P95C on it It has 3 legs on it, 1 of which has broken I am sorry this is all the info he has given me I am not very good with electrics. Thanks Gareth |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| OT : Source for printer control codes needed | UK diy | |||
| Source of Roll Vent or similar ridge ventilation needed | UK diy | |||
| Abrasive #1 1/2 Surface Grinder info needed | Metalworking | |||
Linear Mode
