Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Louspeaker work-around.
I have a c1950's RCA combination unit in working order. It has jacks
for external speakers (which have I do not have) which will accommodate a three pin plug, in an equilateral arrangement on the back. I want to connect other speakers to these jacks but I don't know what the pin assignments are. Any help or suggestions would be appreciated. Neil |
#2
|
|||
|
|||
Louspeaker work-around.
You will need someone who is knowledgeable to trace this out for you and
determine the speaker impedance, if an external output transformer is required, and ect. This is something that requires some base knowledge of the type of receiver you have. You can also try to go to one of the antique electronics sites, and post the make and model number, in case someone will know off hand what you require to do what you want. -- Greetings, Jerry Greenberg GLG Technologies GLG ========================================= WebPage http://www.zoom-one.com Electronics http://www.zoom-one.com/electron.htm ========================================= "neil tupper" wrote in message news:jpVkb.133541$9l5.42876@pd7tw2no... I have a c1950's RCA combination unit in working order. It has jacks for external speakers (which have I do not have) which will accommodate a three pin plug, in an equilateral arrangement on the back. I want to connect other speakers to these jacks but I don't know what the pin assignments are. Any help or suggestions would be appreciated. Neil |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Any Ideas For Organizing A Contractors Work Van? | Woodworking | |||
Salary-VS-Hourly $ 15.00 hr (50 hrs+) Salary with bonus??? hard decision | Woodworking | |||
Will 5C collet hold my work? | Metalworking | |||
Moisture Cure Urethane (Moisture Cured Urethane) | Woodworking | |||
Another toolkit question | UK diy |